Anniversary
- Mark's Wood Chips
- Vectric Craftsman
- Posts: 201
- Joined: Thu Mar 19, 2015 12:36 pm
- Model of CNC Machine: ShopSabre 23 with Rotary
- Location: Hubertus, WI 53033
- Contact:
- Makingtoothpicks
- Vectric Wizard
- Posts: 520
- Joined: Tue Jul 23, 2013 8:46 pm
- Model of CNC Machine: Cncrouterparts CPR2448
- Location: Burien, Wa
- Contact:
Re: Anniversary
Simple , clean and very nice . I like it
Don
Don
Re: Anniversary
How did color the lettering?
- dwilli9013
- Vectric Wizard
- Posts: 1237
- Joined: Mon Sep 30, 2013 12:45 am
- Model of CNC Machine: 3 axis Self Designed Self Built
- Location: Machesney Park Illinois
- Mark's Wood Chips
- Vectric Craftsman
- Posts: 201
- Joined: Thu Mar 19, 2015 12:36 pm
- Model of CNC Machine: ShopSabre 23 with Rotary
- Location: Hubertus, WI 53033
- Contact:
Re: Anniversary
Simply wiped gel stain on, brushed stain into letters, wiped off flat surface and let the remaining gel in the letters dry before applying clear finish.kaetamer wrote:How did color the lettering?
Mark
- Creation in Wood
- Vectric Wizard
- Posts: 863
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
-
- Posts: 45
- Joined: Thu Apr 12, 2018 4:40 am
- Model of CNC Machine: Piranha LX
- Rcnewcomb
- Vectric Archimage
- Posts: 5928
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Anniversary
Reduce your stepover. Try 8% or less.What can I do to reduce or eliminate sanding?
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
-
- Posts: 45
- Joined: Thu Apr 12, 2018 4:40 am
- Model of CNC Machine: Piranha LX
Re: Anniversary
Thx
- Mike-S
- Vectric Wizard
- Posts: 1123
- Joined: Mon Jun 13, 2011 6:45 am
- Model of CNC Machine: Joe's Hybrid 4x4 (but 3x3)
- Location: Hayesville, NC
Re: Anniversary
What Randall said.
For your letters: Tell your machine to "Go To Zero," drop Z by .002", re-zero Z, carve a second time.
For your letters: Tell your machine to "Go To Zero," drop Z by .002", re-zero Z, carve a second time.
-
- Posts: 45
- Joined: Thu Apr 12, 2018 4:40 am
- Model of CNC Machine: Piranha LX
Re: Anniversary
Thanks Mike.
Switching to a 30 or 45 degree bit help also?
Switching to a 30 or 45 degree bit help also?
-
- Posts: 26
- Joined: Fri May 11, 2018 4:44 am
- Model of CNC Machine: Axoim AR8 Pro+ (w/ 4th axis); Aspire 9.0
- Location: Stillwater, MN
- Contact:
Re: Anniversary
Nice! What bit did you use for the lettering?Mark's Wood Chips wrote:It's easy to say "I Love You" with the help of Aspire and a CNC router.
- Creation in Wood
- Vectric Wizard
- Posts: 863
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA