I am considering buying a 4x6 machine with vacuum table.
I made a mistake once and bought an inferior pump.
For this table they use 2 pumps.They sent me a photo of the label, as far as I can see, this is what it says.
2.2 Kw
50 Kz
155 m3/min
31 kg
220 V
2700 l/min
-34 Kpa
For those in the know, is that big enough?
TIA
Vacuum Pump
- Ms Wolffie
- Vectric Wizard
- Posts: 2695
- Joined: Sat Mar 31, 2012 10:41 pm
- Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
- Location: Tully Heads, Wet Tropics, Queensland, Australia
Vacuum Pump
Cheers
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
-
- Posts: 5
- Joined: Sun Nov 17, 2013 7:15 am
- Model of CNC Machine: Axiom Elite
- Location: Las Vegas
- Contact:
Re: Vacuum Pump
You might want to check with an electrician, I think it might run hot since we have 60 Herz in the US
-
- Vectric Wizard
- Posts: 1687
- Joined: Sun Oct 24, 2010 7:28 pm
- Model of CNC Machine: homebuilt 4'x2' (Mach3+G540)
- Location: Guelph, Ontario
- Contact:
Re: Vacuum Pump
Wolffie is from a land down under ...cascayou wrote:You might want to check with an electrician, I think it might run hot since we have 60 Herz in the US
Paul Rowntree
WarpDriver, StandingWave, Topo and gadgets available at PaulRowntree.weebly.com
WarpDriver, StandingWave, Topo and gadgets available at PaulRowntree.weebly.com
- martin54
- Vectric Archimage
- Posts: 7349
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Vacuum Pump
I take it the table is zoned so each vac pump covers half the table
Have you got a link if you are buying this from a company ???
Oh good to see you back posting
Have you got a link if you are buying this from a company ???
Oh good to see you back posting