Thanks for sharing the files, will sure try it out.
Jane
Freebee?!
-
- Vectric Craftsman
- Posts: 201
- Joined: Fri Oct 31, 2014 8:14 am
- Model of CNC Machine: TS1325
- Adrian
- Vectric Archimage
- Posts: 14655
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Freebee?!
Any model created in Aspire can be saved as STL and it can import STL as well so it's not proprietary in that respect. It's native model format is but that doesn't have to be used.
The process of importing an STL file is the same in VCarve and Aspire as far as getting it into the Vectric product goes. Click the "Import a component or 3D model" icon or choose the same item from the menu. I tested them and they import into Aspire fine.
The process of importing an STL file is the same in VCarve and Aspire as far as getting it into the Vectric product goes. Click the "Import a component or 3D model" icon or choose the same item from the menu. I tested them and they import into Aspire fine.
-
- Vectric Craftsman
- Posts: 190
- Joined: Fri Oct 03, 2008 11:01 pm
- Model of CNC Machine: prs standard
- Location: Wisconsin
Re: Freebee?!
Hi there again, I found out that when I downloaded the files. I didn't add the. ...... in the name. What a difference a dot makes. Thanks for the files, Don
-
- Posts: 20
- Joined: Tue Mar 12, 2013 1:25 am
- Model of CNC Machine: HOME BUILT
- Location: Erie, Pennsylvania, USA
Re: Freebee?!
Don, glad you got the files downloaded. There will be one more I'm going to do, It's Christmas themed, and I was a little concerned about everybody having access to it.
I should have it done this coming week.
Adrian, thanks for the clarification about Aspire. I guess some of the people in other forums I frequent are misinformed.
Greg
I should have it done this coming week.
Adrian, thanks for the clarification about Aspire. I guess some of the people in other forums I frequent are misinformed.
Greg
-
- Posts: 20
- Joined: Tue Mar 12, 2013 1:25 am
- Model of CNC Machine: HOME BUILT
- Location: Erie, Pennsylvania, USA
Re: Freebee?!
Here is the Christmas one I mentioned...not much...just a wreath.
This is the link to it.
https://drive.google.com/open?id=1hUWA1 ... hGH-RPRezv_
Everyone have a good Thanksgiving holiday!
Greg
This is the link to it.
https://drive.google.com/open?id=1hUWA1 ... hGH-RPRezv_
Everyone have a good Thanksgiving holiday!
Greg
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
-
- Vectric Apprentice
- Posts: 83
- Joined: Mon Nov 03, 2014 12:46 am
- Model of CNC Machine: Laguna CNC
Re: Freebee?!
Thank you for the great files much appreciated