Steamer Chest
- Creation in Wood
- Vectric Wizard
- Posts: 863
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA
Steamer Chest
My granddaughter Anna ask me to build her a Steamer Chest for her room. I used Aspire 9.0 to design the chest and cut most of it on the CNC. Lot of the work after the CNC was completed on the router table.
Wood White Oak
Finish I burned the White Oak with a touch to highlight the grain than applied a coat of shellac. Stained it with Van Dyke Brown and the finish coat is Conversion Varnish sprayed.
Size 39" L x 22" W x 20" H
Wood White Oak
Finish I burned the White Oak with a touch to highlight the grain than applied a coat of shellac. Stained it with Van Dyke Brown and the finish coat is Conversion Varnish sprayed.
Size 39" L x 22" W x 20" H
Thank You
Doug
Doug
- dwilli9013
- Vectric Wizard
- Posts: 1237
- Joined: Mon Sep 30, 2013 12:45 am
- Model of CNC Machine: 3 axis Self Designed Self Built
- Location: Machesney Park Illinois
Re: Steamer Chest
Beautiful work. Love the personal touch put on the inside tray. I am sure this will be cherished well received.
I have yet to try any of the flame finish techniques this definitely pushes me towards it.
Thanks for sharing this with us.
I have yet to try any of the flame finish techniques this definitely pushes me towards it.
Thanks for sharing this with us.
D-Dub
Dwayne
Dwilli
Dwayne
Dwilli
- gkas
- Vectric Wizard
- Posts: 1451
- Joined: Sun Jan 01, 2017 3:39 am
- Model of CNC Machine: Aspire, Axiom AR8 Pro+, Axiom 4.2W Laser
- Location: Southern California
Re: Steamer Chest
Very nice. That was a lot of work. Did you design it from scratch?
- Creation in Wood
- Vectric Wizard
- Posts: 863
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA
Re: Steamer Chest
Dwayne
Try the flame burn. White Oak is a boring wood. The burning brings the grain out and makes it much more attractive.
Try the flame burn. White Oak is a boring wood. The burning brings the grain out and makes it much more attractive.
Thank You
Doug
Doug
- Creation in Wood
- Vectric Wizard
- Posts: 863
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA
Re: Steamer Chest
Months of work. took days to install the hardware alone.
Yes I designed the Steamer Chest.
Yes I designed the Steamer Chest.
Thank You
Doug
Doug
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Steamer Chest
Beautiful work Doug!!! I know it's going to be a cherished item for your granddaughter for the rest of her life.
Thanks for sharing.
Thanks for sharing.
John
Maker of Chips
Maker of Chips
-
- Vectric Wizard
- Posts: 528
- Joined: Thu May 14, 2015 12:23 am
- Model of CNC Machine: FLA Saturn 4x4 / 7W & 60W lasers
- Location: Bemidji, MN
- Contact:
Re: Steamer Chest
Another great and creative project, Doug! Great work!! Bet your granddaughter will love it.
Dave
Dave
Dave
https://lakesedgewoodcraft.com/
https://lakesedgewoodcraft.com/
- mtylerfl
- Vectric Archimage
- Posts: 5896
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Steamer Chest
Wonderful project! I love the overall design and finishing technique. Lots of character and charm. Beautiful work!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
Re: Steamer Chest
Stunning! So much care and detail. Well done.
Re: Steamer Chest
Nice job, very well done.
- Creation in Wood
- Vectric Wizard
- Posts: 863
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA
-
- Vectric Wizard
- Posts: 413
- Joined: Wed Jul 09, 2014 1:19 am
- Model of CNC Machine: CRP Pro 4848 Custom Build
- Location: Drumheller, Alberta, Canada
- Contact:
Re: Steamer Chest
Fantastic chest!
Connor Bredin
Distinctive Dimensional Concepts Ltd.
www.distinctive-concepts.ca
Distinctive Dimensional Concepts Ltd.
www.distinctive-concepts.ca
-
- Posts: 7
- Joined: Tue May 23, 2017 11:48 pm
- Model of CNC Machine: Home made - 2 ft. X 4 ft.
- Location: Frederick, CO
Re: Steamer Chest
Really nice project, very impressive. Will be a family for years, long past your life, for the family to remember you.
-
- Vectric Wizard
- Posts: 679
- Joined: Thu Jan 15, 2009 1:08 am
- Model of CNC Machine: AXYZ 5010
- Location: Maryhill Ontario Canada
- Contact:
- Creation in Wood
- Vectric Wizard
- Posts: 863
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA