Freebee?!

This forum is for general discussion regarding VCarve Pro

Freebee?!

Postby Metalbender » Thu Nov 09, 2017 2:48 am

I've learned a lot from gleaning all the posts in here.
I think I finally got the hang of creating my own reliefs for carving.
I've tried to upload the stl file but when I click on "add the file" I get bumped out.
Is uploading stl's allowed? I'd like to upload it for others to use.

Thanks to all
Greg
Southridge CNC
Attachments
SOLITUDE.jpg
Metalbender
 
Posts: 20
Joined: Tue Mar 12, 2013 1:25 am
Location: Erie, Pennsylvania, USA
Model of CNC Machine: HOME BUILT

Re: Freebee?!

Postby highpockets » Thu Nov 09, 2017 2:55 am

Very nice job Greg!!! I'd say you have the hang of it.
Looking at your profile, you don't have permission to upload files yet. You have to have so much time or posts on the board (can't remember which) before you can upload or PM.
You might try contacting support@vectric.com and see if they will grant you permission.
John
Maker of Chips
User avatar
highpockets
Vectric Wizard
 
Posts: 1278
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Freebee?!

Postby Metalbender » Thu Nov 09, 2017 3:04 am

Here's a jpg from the 3D viewer I use.
If anyone wants the file let me know and I'll try to E-mail it or something, it's about 34,000KB in size.

Greg
Attachments
Solitude.jpg
Metalbender
 
Posts: 20
Joined: Tue Mar 12, 2013 1:25 am
Location: Erie, Pennsylvania, USA
Model of CNC Machine: HOME BUILT

Re: Freebee?!

Postby martin54 » Thu Nov 09, 2017 3:40 am

As John has said looks like you have the hang of it, better than anything I could do myself, have you made that from scratch or just used existing components & assembled it?

If you have put it together using existing components then make sure you aren't breaking any copyright regulations before you share it with anyone, not sure how copyright works with something like that myself :lol: :lol: :lol:
User avatar
martin54
Vectric Wizard
 
Posts: 3277
Joined: Fri Nov 09, 2012 2:12 pm
Location: Crossgates, Scotland
Model of CNC Machine: Gerber System 48 (modified)

Re: Freebee?!

Postby Metalbender » Thu Nov 09, 2017 3:47 am

I gathered images from google designated "free for commercial use" or "royalty free" Those are the 4 pine trees on the right.
The mountains are from a photograph I took while on vacation.
The sequoias and the doe I sketched from scratch.

Greg
Metalbender
 
Posts: 20
Joined: Tue Mar 12, 2013 1:25 am
Location: Erie, Pennsylvania, USA
Model of CNC Machine: HOME BUILT

Re: Freebee?!

Postby highpockets » Thu Nov 09, 2017 4:50 am

Well if you find a way to post it, I'd like a copy.....
John
Maker of Chips
User avatar
highpockets
Vectric Wizard
 
Posts: 1278
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Freebee?!

Postby Rcnewcomb » Thu Nov 09, 2017 7:18 am

34,000KB in size

That is well above the 2MB file size limit. You will need to put it on something like DropBox or GoogleDrive and share the link.
- Randall Newcomb
10 fingers in, 10 fingers out - another good day in the shop
User avatar
Rcnewcomb
Vectric Wizard
 
Posts: 2688
Joined: Fri Nov 04, 2005 5:54 am
Location: San Jose, California, USA
Model of CNC Machine: Shopbot, CAMaster

Re: Freebee?!

Postby Metalbender » Thu Nov 09, 2017 7:50 pm

Let's see if this old dog learned something new today.
I uploaded it to Google drive. This should be the link!?

https://drive.google.com/open?id=1Yuv9r ... 4hMtkqYH3w

Let me know if it works.

Greg
Metalbender
 
Posts: 20
Joined: Tue Mar 12, 2013 1:25 am
Location: Erie, Pennsylvania, USA
Model of CNC Machine: HOME BUILT

Re: Freebee?!

Postby dwilli9013 » Thu Nov 09, 2017 8:07 pm

Well I would say yes you did indeed learn something new today. Downloaded without a hitch. Quite a nice model. Thank you for sharing it with us. :lol: :lol:
D-Dub
Dwayne
Dwilli
User avatar
dwilli9013
Vectric Wizard
 
Posts: 831
Joined: Mon Sep 30, 2013 12:45 am
Location: Machesney Park Illinois
Model of CNC Machine: 3 axis Self Designed Self Built

Re: Freebee?!

Postby Metalbender » Fri Nov 10, 2017 3:59 am

Attachments
Dinner Meets Diner.jpg
HALLOWEEN PLAQUE CARVED.jpg
Metalbender
 
Posts: 20
Joined: Tue Mar 12, 2013 1:25 am
Location: Erie, Pennsylvania, USA
Model of CNC Machine: HOME BUILT

Re: Freebee?!

Postby highpockets » Fri Nov 10, 2017 4:20 am

Great work, thank you sharing. I really like the Halloween one, will make that one for next year..... :) :) :)
John
Maker of Chips
User avatar
highpockets
Vectric Wizard
 
Posts: 1278
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: Freebee?!

Postby Hunterland » Fri Nov 10, 2017 4:21 am

thanks for the models and I hopefully can find time to cut them .Don
Hunterland
Vectric Craftsman
 
Posts: 170
Joined: Fri Oct 03, 2008 11:01 pm
Location: Wisconsin
Model of CNC Machine: prs standard

Re: Freebee?!

Postby Trock » Fri Nov 10, 2017 4:50 am

Thank you for the nice files. Very generous of you.
I like the Solitude job. :D
Trock
Vectric Apprentice
 
Posts: 18
Joined: Sat Mar 07, 2015 3:25 am
Location: Michigan
Model of CNC Machine: Home Made 2'x3' Mach3

Re: Freebee?!

Postby Hunterland » Fri Nov 10, 2017 4:58 am

I down loaded the files but they do not show up as a model when I try to import them into aspire 9.0. has the procedure changed from 8.5
Hunterland
Vectric Craftsman
 
Posts: 170
Joined: Fri Oct 03, 2008 11:01 pm
Location: Wisconsin
Model of CNC Machine: prs standard

Re: Freebee?!

Postby Arnell » Fri Nov 10, 2017 11:07 am

Thank you for sharing your files.
Arnell
 
Posts: 25
Joined: Mon Jul 02, 2012 7:16 pm
Model of CNC Machine: Zen

Next

Return to VCarve - General

Who is online

Users browsing this forum: Bing [Bot], Google [Bot] and 17 guests