I have several files that were created in different versions of aspire, I need to get them to open for s repeat of a job from several years ago
thanks in advance
Running files fron diffrent versions
- Rcnewcomb
- Vectric Archimage
- Posts: 5887
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Running files fron diffrent versions
Newer software can open files created from older versions unless it is a REALLY old version like 1.0
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
Re: Running files fron diffrent versions
HOW FAR FOWARD FOWARD OR BACKWARDS FROM V6
- Rcnewcomb
- Vectric Archimage
- Posts: 5887
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Running files fron diffrent versions
With V6 you can open files as far back as V1.5, and as far forward a V6HOW FAR FOWARD OR BACKWARDS FROM V6
BTW, I was able to open files as far back as V1.5 with Aspire V9.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- martin54
- Vectric Archimage
- Posts: 7339
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Running files fron diffrent versions
You must be asking about Vcarve as I don't believe there was an Aspire V6, think it went straight from V4.5 to V8 which brought both Aspire & Vcarve inline with each other version number wise.DLS1 wrote:HOW FAR FOWARD FOWARD OR BACKWARDS FROM V6
Not sure how the vcarve versions work in relation to Aspire prior to V8 so can't say how far back V6 of vcarve would be able to import files, there is no forward compatibility at all so you wouldn't be able to open any files created on a version latter than V6