i am attempting my 1st nesting work and am cutting fairly small (3"X5") pieces with tabs. When I preview the toolpath, the view shows sporadic places around the piece cutting through the work and is pixilated due to the enlargement, I suppose. I have increased the view from standard to 7X, but the view remains pixillated. Do I need to trust the view, or the input (profile/.265 depth) in 1/4" mdf?
Thanks
Nesting and view
-
- Vectric Craftsman
- Posts: 298
- Joined: Thu Dec 18, 2008 3:05 am
Re: Nesting and view
Sorry... this is on a 49"X96" sheet...
- Adrian
- Vectric Archimage
- Posts: 14650
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Nesting and view
The settings you need to check are on the Toolpath Menu under Preview Simulation Quality. Small pieces cut out of large sheet with a small bit can pixilate so I'd go straight to the maximum setting.
The modelling resolution doesn't have any bearing on the preview settings.
The modelling resolution doesn't have any bearing on the preview settings.