Hey all,
Is it me doing something wrong, but "machined area color" will only show up as the material color. I can not seem to get anything else. Am I missing a trick?
Aspire 9.010
TIA,
Fred
Is machined area color busted?
- martin54
- Vectric Archimage
- Posts: 7355
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Is machined area color busted?
seems to be working OK for me Fred, global & toolpath colour, don't know if you have missed a setting somewhere but if it wasn't working then I would have thought there would be a lot more posts about it, 9.010 has been the latest version since August 16th
- Adrian
- Vectric Archimage
- Posts: 14683
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Is machined area color busted?
There have been a couple of posts about it but, like Martin, I could never replicate it. It might be only affecting certain setups or requires a certain combination of events.
- FixitMike
- Vectric Wizard
- Posts: 2177
- Joined: Sun Apr 17, 2011 5:21 am
- Model of CNC Machine: Shark Pro Plus (retired)
- Location: Burien, WA USA
Re: Is machined area color busted?
I had this problem and contacted Vectric. Here's their answer:
"Hello Michael.
Is this an older file that you opened in the latest version by any chance.
This was an issue in an older version of V9.0 that has since been resolved.
In this file it should work if you recalculate all toolpaths to renew the colour data and then reset the toolpath preview and re run it for the expected results.
I hope this helps
Best Regards
Charlotte"
"Hello Michael.
Is this an older file that you opened in the latest version by any chance.
This was an issue in an older version of V9.0 that has since been resolved.
In this file it should work if you recalculate all toolpaths to renew the colour data and then reset the toolpath preview and re run it for the expected results.
I hope this helps
Best Regards
Charlotte"
Good judgement comes from experience.
Experience comes from bad judgement.
Experience comes from bad judgement.
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Is machined area color busted?
In Aspire 9.x I've given up trying to figure out the color and material setting. I never know what is going to display the first time I run Preview Toolpath. Even after setting it to what I want sometimes when I make changes to a toolpath and rerun Preview it reverts back to old unwanted settings. Yes it's a pain, but not something I can't live with.....
John
Maker of Chips
Maker of Chips
-
- Vectric Apprentice
- Posts: 57
- Joined: Thu Aug 04, 2016 1:40 am
- Model of CNC Machine: Laguna Swift 4x4, Shapeoko S3 XL
- Location: Massachusetts
- Contact:
Re: Is machined area color busted?
Yah, it seems to have a mind of it's own. As you said, it's not a game changer.highpockets wrote:In Aspire 9.x I've given up trying to figure out the color and material setting. I never know what is going to display the first time I run Preview Toolpath. Even after setting it to what I want sometimes when I make changes to a toolpath and rerun Preview it reverts back to old unwanted settings. Yes it's a pain, but not something I can't live with.....
Fred
-
- Vectric Apprentice
- Posts: 91
- Joined: Wed Dec 28, 2011 2:47 am
- Model of CNC Machine: Home Built
- Location: Lloydminster, Alberta, Canada
Re: Is machined area color busted?
+1highpockets wrote:In Aspire 9.x I've given up trying to figure out the color and material setting. I never know what is going to display the first time I run Preview Toolpath. Even after setting it to what I want sometimes when I make changes to a toolpath and rerun Preview it reverts back to old unwanted settings. Yes it's a pain, but not something I can't live with.....
-
- Vectric Apprentice
- Posts: 58
- Joined: Wed Feb 15, 2017 10:38 pm
- Model of CNC Machine: Piranha FX / VCarve Desktop
- Location: Tucson, Arizona
Re: Is machined area color busted?
Try 2-Sided Machining and put 2 different "Woods" on each side...
I have had All sorts of strangeness with the most recent update.
Phil
I have had All sorts of strangeness with the most recent update.
Phil
-
- Vectric Wizard
- Posts: 520
- Joined: Tue Jul 21, 2009 8:22 pm
- Model of CNC Machine: ShopBot Buddy Standard
- Location: Marietta, GA.
Re: Is machined area color busted?
Mine only shows material color, but will show a toolpath color...joe
-
- Vectric Staff
- Posts: 541
- Joined: Wed Jul 19, 2017 11:59 am
- Model of CNC Machine: Craft CNC DS1
Re: Is machined area color busted?
9.011 is now released and should address this issue.
If your problems still persist, or discover other issues, please try to report them to us so we can fix them.
Please don't give up on us
Mohamed
If your problems still persist, or discover other issues, please try to report them to us so we can fix them.
Please don't give up on us
Mohamed
--------------
Mohamed
++++++++
Mohamed
++++++++