Just finished this install today.
. 5" acrylic on brushed metal dibond, with. Is tomorrow slim cabinet for the LEDs. Power supplies bidding above ceiling.
Acrylic push thru letter sign/led lit
- customquint
- Vectric Craftsman
- Posts: 240
- Joined: Tue Jan 25, 2011 4:18 am
- Model of CNC Machine: AXYZ
- Location: Piqua, OH
- Contact:
-
- Vectric Wizard
- Posts: 413
- Joined: Wed Jul 09, 2014 1:19 am
- Model of CNC Machine: CRP Pro 4848 Custom Build
- Location: Drumheller, Alberta, Canada
- Contact:
Re: Acrylic push thru letter sign/led lit
Yes! Love it!
Connor Bredin
Distinctive Dimensional Concepts Ltd.
www.distinctive-concepts.ca
Distinctive Dimensional Concepts Ltd.
www.distinctive-concepts.ca
- dwilli9013
- Vectric Wizard
- Posts: 1237
- Joined: Mon Sep 30, 2013 12:45 am
- Model of CNC Machine: 3 axis Self Designed Self Built
- Location: Machesney Park Illinois
Re: Acrylic push thru letter sign/led lit
Nice came out quite well. Thanks for sharing.
D-Dub
Dwayne
Dwilli
Dwayne
Dwilli
- dwilli9013
- Vectric Wizard
- Posts: 1237
- Joined: Mon Sep 30, 2013 12:45 am
- Model of CNC Machine: 3 axis Self Designed Self Built
- Location: Machesney Park Illinois
Re: Acrylic push thru letter sign/led lit
Nice came out quite well. Thanks for sharing.
D-Dub
Dwayne
Dwilli
Dwayne
Dwilli
- adze_cnc
- Vectric Wizard
- Posts: 4380
- Joined: Sat Jul 27, 2013 10:08 pm
- Model of CNC Machine: AXYZ 4008
- Location: Vancouver, BC, Canada
Re: Acrylic push thru letter sign/led lit
What is a "push through letter"?
- customquint
- Vectric Craftsman
- Posts: 240
- Joined: Tue Jan 25, 2011 4:18 am
- Model of CNC Machine: AXYZ
- Location: Piqua, OH
- Contact:
Re: Acrylic push thru letter sign/led lit
It's when you make acrylic letters that have a flange on the bottom that goes through an opaque sign substrate.adze_cnc wrote:What is a "push through letter"?
Use the flange to mount to the back side.
You can make the acrylic letters two ways.
This job we took .5" acrylic and milled down .375" around all the letters so we could install all the letters as one piece.
You can also use two layers of acrylic and bond the cut letters to a piece you are using and a flange.
Goal is to have the letter stick out further than the face, this sign they stick out about .25"
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Acrylic push thru letter sign/led lit
Looks really good, thanks for sharing.
John
Maker of Chips
Maker of Chips