New England Meet and Greet
- Leo
- Vectric Wizard
- Posts: 4089
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
New England Meet and Greet
August 12, 2017
Plan on it.
Agenda to follow.
Nothing special is planned as to training, or teaching. It's just a social event.
This will be OPEN - if someone wants to do a demo or teach that is welcome and totally voluntary.
I will have a computer, shop, CNC router, Laser engraver, all the woodworking toys, a nice yard, garden, three 10x10 popups, plenty of parking. I have SOME seating but not a lot. If you have folding chairs and are local, please bring them. I have a few folding tables.
Kids, dogs, cats, spouses, friends - ALL invited.
PLEASE - NO alcohol - not even beer. (This is my only request - please honor it)
I will have Hot Dogs, Hamburgers, Linguicia dogs, fruit, water, coffee, soda, ice, and maybe some other stuff.
If you want to bring something to share please let me know so I can make sure we don't get duplicates.
I am NOT going to ask for any money, but I WILL be spending money and I really cannot afford to do a complete freebie. Please donate, IF YOU CAN, and please do NOT donate if you truly cannot donate. But - PLEASE - DO - COME - and enjoy the day at my place with kindred spirits.
Please EMAIL me at voisil@comcast.net
I will send you my address and contact information and add you to the list, so I can plan accordingly.
Plan on it.
Agenda to follow.
Nothing special is planned as to training, or teaching. It's just a social event.
This will be OPEN - if someone wants to do a demo or teach that is welcome and totally voluntary.
I will have a computer, shop, CNC router, Laser engraver, all the woodworking toys, a nice yard, garden, three 10x10 popups, plenty of parking. I have SOME seating but not a lot. If you have folding chairs and are local, please bring them. I have a few folding tables.
Kids, dogs, cats, spouses, friends - ALL invited.
PLEASE - NO alcohol - not even beer. (This is my only request - please honor it)
I will have Hot Dogs, Hamburgers, Linguicia dogs, fruit, water, coffee, soda, ice, and maybe some other stuff.
If you want to bring something to share please let me know so I can make sure we don't get duplicates.
I am NOT going to ask for any money, but I WILL be spending money and I really cannot afford to do a complete freebie. Please donate, IF YOU CAN, and please do NOT donate if you truly cannot donate. But - PLEASE - DO - COME - and enjoy the day at my place with kindred spirits.
Please EMAIL me at voisil@comcast.net
I will send you my address and contact information and add you to the list, so I can plan accordingly.
Last edited by Leo on Mon Jul 03, 2017 1:55 am, edited 1 time in total.
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: New England Meet and Greet
My "Plan A" for a ride to Leo's JUST fell through:(
Anybody in Maine going that could take a 6 mile detour from Mile 24 on the Turnpike that could give a guy and a wheelchair a ride?
Chauffeuring (and having your ear talked off) recompensed with very decent hardwood selection
Lodging and demoing of your choice of Tiny stuff also available?
Hoping,
scott
Anybody in Maine going that could take a 6 mile detour from Mile 24 on the Turnpike that could give a guy and a wheelchair a ride?
Chauffeuring (and having your ear talked off) recompensed with very decent hardwood selection
Lodging and demoing of your choice of Tiny stuff also available?
Hoping,
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
- Posts: 27
- Joined: Fri Jul 05, 2013 9:42 pm
- Model of CNC Machine: Shopbot Desktop MAX
- Location: Bloomingdale NJ
- Contact:
Re: New England Meet and Greet
Scott ... I can be a backup (Plan C). It would be a 184 mile detour for me, so I would need to take you up on lodging for both Friday and Saturday nights. If your wheelchair won't fold enough to go in the back of the MINI Clubman, I can bring the Sprinter van.
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: New England Meet and Greet
Thanks Bob:)
We'll keep that at Plan "Z" because of the crazy detour.
Nice to know you're going:)
Working on a guy I trained with a pick up truck, but he's out straight usually with day job at P&W and the "Button" job I passed to him.
Appreciate it!
scott
We'll keep that at Plan "Z" because of the crazy detour.
Nice to know you're going:)
Working on a guy I trained with a pick up truck, but he's out straight usually with day job at P&W and the "Button" job I passed to him.
Appreciate it!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
- Posts: 46
- Joined: Wed Aug 12, 2015 10:01 pm
- Model of CNC Machine: ShopBot Desktop
Re: New England Meet and Greet
if I could take time off I'd be there in a minute... love the work you and Scottp55 post and would love to pick you guys brain in person
but son is enroute to Alaska same dates... that being said if you guys ever aspire to make it up, we can host a day or two in exchange for educating me (or host a fishing trip)...
the bear (aka Barry)
but son is enroute to Alaska same dates... that being said if you guys ever aspire to make it up, we can host a day or two in exchange for educating me (or host a fishing trip)...
the bear (aka Barry)
- Mark's Wood Chips
- Vectric Craftsman
- Posts: 201
- Joined: Thu Mar 19, 2015 12:36 pm
- Model of CNC Machine: ShopSabre 23 with Rotary
- Location: Hubertus, WI 53033
- Contact:
Re: New England Meet and Greet
Leo:Leo wrote:August 12, 2017
Please EMAIL me at voisil@comcast.net
I will send you my address and contact information and add you to the list, so I can plan accordingly.
I sent an e-mail to the above address and did not get a response. Please check your junk folder.
Thanks,
Mark
- Leo
- Vectric Wizard
- Posts: 4089
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: New England Meet and Greet
Just been a little busy.
I will update everyone in the next few days
I will update everyone in the next few days
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
Re: New England Meet and Greet
Leo
if you still have space my wife and I would like to come to the meet and. You know what time does it start?will be coming by airline from Philly. After me and greet will continue on up to Portland to visit family.
Noel Carr
The Engraving Shop
Noel@delengraving.com
if you still have space my wife and I would like to come to the meet and. You know what time does it start?will be coming by airline from Philly. After me and greet will continue on up to Portland to visit family.
Noel Carr
The Engraving Shop
Noel@delengraving.com
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: New England Meet and Greet
Thanks Bob for the truly wonderful offer, BUT you're off the hook now:)
Got the operator of the second Shopbot Desktop to come with me and he's only 20 miles away:)
Contacting Leo next to let him know 2 more are coming
This should be fun!
scott
Got the operator of the second Shopbot Desktop to come with me and he's only 20 miles away:)
Contacting Leo next to let him know 2 more are coming
This should be fun!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- Leo
- Vectric Wizard
- Posts: 4089
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: New England Meet and Greet
I know I am slow in responding to all who have emailed me, but I promise, I will be sending ALL of you my information.
Scott - I am GLAD you can come.
Yes there is room for more families - please come.
Scott - I am GLAD you can come.
Yes there is room for more families - please come.
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: New England Meet and Greet
Leo,
Will show and tell items be welcome?
Thanks,
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- Leo
- Vectric Wizard
- Posts: 4089
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: New England Meet and Greet
I know I am horrible about sending out the information email, but we are still ON.
There are a few people signed up.
I promise I will send out EMAIL directions this week.
Anybody else wanna come?
There are a few people signed up.
I promise I will send out EMAIL directions this week.
Anybody else wanna come?
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
- Leo
- Vectric Wizard
- Posts: 4089
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: New England Meet and Greet
Sorry about being so slow to send out contact info. I just sent it out today. I have been busy with a lot of stuff, but now I am getting ready for Saturday. Boy, this comes up on you FAST.
Still time to sign up. Price is right, come and meet some kindred spirits.
Still time to sign up. Price is right, come and meet some kindred spirits.
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
- mezalick
- Vectric Wizard
- Posts: 2980
- Joined: Mon Nov 03, 2008 9:07 am
- Model of CNC Machine: Camaster Cobra
- Location: Philadelphia, PA USA
- Contact:
Re: New England Meet and Greet
Leo,
Thanks for the update..
Any suggestion as to where to stay ??
Michael
Thanks for the update..
Any suggestion as to where to stay ??
Michael
Michael Mezalick
https://www.youtube.com/user/mezalick
mm@mezalick.com
https://www.youtube.com/user/mezalick
mm@mezalick.com