The Dancing Clock
-
- Vectric Apprentice
- Posts: 56
- Joined: Sun Feb 09, 2014 8:22 pm
- Model of CNC Machine: Homebuilt/ 32" x 54"
- Location: Telford, PA
The Dancing Clock
95% credit for this project goes to Wood Magazine 2010 July issue. All I did was take their pdf files and changed them in crv files. Then I added some oak & maple and for the finish-it was given to my three small grandchildren!
- mtylerfl
- Vectric Archimage
- Posts: 5896
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: The Dancing Clock
That came out great. I'm sure the grandkids love 'em!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
-
- Vectric Craftsman
- Posts: 245
- Joined: Thu Jan 02, 2014 4:34 am
- Model of CNC Machine: Home built cnc router using Masso G3.
Re: The Dancing Clock
I made one of these for a very special little girl, last year.
The plans are for a boy, so I did some extra work and made a girl.
Sounds like you went through the same process as I did.
The plans are for a boy, so I did some extra work and made a girl.
Sounds like you went through the same process as I did.
-
- Posts: 7
- Joined: Thu Mar 02, 2017 9:51 pm
- Model of CNC Machine: cnc shark hd4
Re: The Dancing Clock
Very nice!! Are you a ham operator by chance? I am N5PU.
-
- Vectric Apprentice
- Posts: 56
- Joined: Sun Feb 09, 2014 8:22 pm
- Model of CNC Machine: Homebuilt/ 32" x 54"
- Location: Telford, PA
Re: The Dancing Clock
I am W3LMR Always good to meet a fellow Ham Operator & fellow woodworker!
-
- Posts: 17
- Joined: Wed Mar 29, 2017 4:07 am
- Model of CNC Machine: PIRANHA
- Location: Dallas, TX
Re: The Dancing Clock
Not to run off on a tangent but N5IWA here.
73
73
- hooked
- Vectric Apprentice
- Posts: 60
- Joined: Mon Oct 12, 2015 10:06 pm
- Model of CNC Machine: SCRATCH BUILT CNC ROUTER
- Location: Paradise Beach - Australia
- Contact:
Re: The Dancing Clock
This could go on
VK3AWA
VK3AWA
Re: The Dancing Clock
I found the plans for this clock here https://www.skiltools.com/How-To/Docume ... ClockR.pdf.
It was postred by Skil tools, I'd have to assume that they had permission from Wood Magazine
It was postred by Skil tools, I'd have to assume that they had permission from Wood Magazine
- sharkcutup
- Vectric Wizard
- Posts: 2928
- Joined: Sat Mar 26, 2016 3:48 pm
- Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
- Location: U.S.A.
Re: The Dancing Clock
Here are my versions of the Dancing Clock. They are designed to be hanging wall clocks to avoid any child play accidents!
Sharkcutup
Sharkcutup
V-Carve Pro Tips, Gadget Tips & Videos
YouTube Channel - Sharkcutup CNC
V-Carve Pro 12.005
YouTube Channel - Sharkcutup CNC
V-Carve Pro 12.005
-
- Posts: 49
- Joined: Sat Feb 02, 2013 4:45 pm
- Model of CNC Machine: Legacy Arty 58
- Location: Fridley, MN
Re: The Dancing Clock
The originating plans are from Meisel Hardware Specialties, http://meiselwoodhobby.com/Products/Vie ... &Path=2941 and are a bit more money that Wood Magazine sells them for....$15.00. They, Meisel, sell the clock kit and face...for a bit more of course. Cute never the less and youse guys did a great job. On my bucket list now.
George
WA0FSE
George
WA0FSE
George
Fridley, MN
Legacy Arty, Aspire, CCAM
Fridley, MN
Legacy Arty, Aspire, CCAM
-
- Posts: 44
- Joined: Sun Sep 17, 2017 6:41 am
- Model of CNC Machine: Shapeoko3
- Location: Saskatchewan, Canada
Re: The Dancing Clock
What beautiful work for the Children, Gentlemen!
Just sharing my Canadian presence with the crowd! Very talented HAM's on this forum.
I`m pleased to welcome my existence to the Vectric community as a Newbie!
Hope to be able to share some of my ideas once I am able to purchase my CNC later this Spring (I`ve been waiting since I quit smoking back in October 2015... but then again other commitments...).
73 de
VE5MDH
Michael
Just sharing my Canadian presence with the crowd! Very talented HAM's on this forum.
I`m pleased to welcome my existence to the Vectric community as a Newbie!
Hope to be able to share some of my ideas once I am able to purchase my CNC later this Spring (I`ve been waiting since I quit smoking back in October 2015... but then again other commitments...).
73 de
VE5MDH
Michael