passes not saving

Post general information and questions relating to Cut2D in this Forum.
Post Reply
cromag08
Posts: 11
Joined: Mon May 29, 2017 3:47 pm
Model of CNC Machine: mydiycnc

passes not saving

Post by cromag08 »

i'm trying to change the number of passes and it's not working. i click on 'set passes' after i set the number i want. then i close the window, open it back up and it's reverted back to what it was before. any help?

User avatar
highpockets
Vectric Wizard
Posts: 3667
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: passes not saving

Post by highpockets »

Change the "Pass Depth" for the tool.
John
Maker of Chips

User avatar
Adrian
Vectric Archimage
Posts: 14492
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: passes not saving

Post by Adrian »

You need to click Calculate rather than Close to exit the toolpath dialog otherwise you're not saving the toolpath settings.

cromag08
Posts: 11
Joined: Mon May 29, 2017 3:47 pm
Model of CNC Machine: mydiycnc

Re: passes not saving

Post by cromag08 »

sorry, forgot to mention that i have already done that. pass depth for the tool is .0625". pocket depth stays at .1042", profile depth stays at .125".

cromag08
Posts: 11
Joined: Mon May 29, 2017 3:47 pm
Model of CNC Machine: mydiycnc

Re: passes not saving

Post by cromag08 »

ah ha, calculate. thanks!

Post Reply