Another small display stand
- jarm2
- Vectric Craftsman
- Posts: 246
- Joined: Wed Jun 13, 2012 9:16 pm
- Model of CNC Machine: C&CNC electronics 4x4 ext aluminum table
- Location: Harpster, Idaho
Another small display stand
I made these stands to display my items at shows. The 1/8" ones are laser cut, but could be cut with a mill as well if the spacing is increased and tabs added. The 1/4" ones were also laser cut, but could be milled too. These are nice because they are quick and easy to take apart and set up and they hold most of my pieces in a good angle for viewing. The 1/8" ones are set up for a 12" x 24" piece of 1/8" mdf. The 1/4" ones are set up for a 16" x 8" piece of 1/4" mdf or plywood.
- Attachments
-
- 1_4 in display racks.crv
- (34 KiB) Downloaded 159 times
-
- Display racks.crv
- (63 KiB) Downloaded 151 times
Aspire 11 ViaCAD Pro 12 Corel 2019 W 10, 2.2 kw spindle wireless pendant
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Another small display stand
Thanks Jarm!
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- Creation in Wood
- Vectric Wizard
- Posts: 856
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA