I know it is tough to price an unseen setup but roughly what would be a good price for a 2003 4x4 with digital probe, diamond blade,vinyl cutter all working fine with all the controls with it. I asked this question on the Shopbot forum and got no response so I wanted to try you guys and see if someone can give me some guidance. If someone could even say yes it is worth $5K at least.
Mike
2003 Shopbot value
-
- Vectric Apprentice
- Posts: 52
- Joined: Wed May 24, 2006 2:06 pm
- Location: Wisconsin,USA
2003 Shopbot value
PhotoVCarve
VCarvePro v8
VectorArt3d
Servo Driven 12X24 router
Plasmacam 4x4
VCarvePro v8
VectorArt3d
Servo Driven 12X24 router
Plasmacam 4x4
- scottp55
- Vectric Wizard
- Posts: 4713
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: 2003 Shopbot value
Mike,
It's probably best to post it on the Shopbot Forum;
http://www.talkshopbot.com/forum/forumd ... items-only
And post as many pictures as you can...including the control box and a close up of the steppers as well.
Should give you a ballpark range.
scott
It's probably best to post it on the Shopbot Forum;
http://www.talkshopbot.com/forum/forumd ... items-only
And post as many pictures as you can...including the control box and a close up of the steppers as well.
Should give you a ballpark range.
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
- Vectric Wizard
- Posts: 1592
- Joined: Sun Sep 16, 2007 2:59 pm
- Model of CNC Machine: Custom DIY
- Location: Lake St Clair, MI, USA
- Contact:
Re: 2003 Shopbot value
Does it have a spindle, or a router? If no spindle, I don't think it's worth more than $3K to $4K.michael307 wrote:. If someone could even say yes it is worth $5K at least.
But the reality is that it's worth whatever someone is willing to pay.
Gerry - http://www.thecncwoodworker.com
-
- Vectric Apprentice
- Posts: 52
- Joined: Wed May 24, 2006 2:06 pm
- Location: Wisconsin,USA
Re: 2003 Shopbot value
These are some of the pictures
Mike
Mike
PhotoVCarve
VCarvePro v8
VectorArt3d
Servo Driven 12X24 router
Plasmacam 4x4
VCarvePro v8
VectorArt3d
Servo Driven 12X24 router
Plasmacam 4x4