my turn of the old man
-
- Vectric Apprentice
- Posts: 63
- Joined: Mon Sep 19, 2016 8:45 am
- Model of CNC Machine: bravoprodigy be3030
my turn of the old man
finished size 310mmx290x35mm machined in pine finished with bronze b metal coating then tiffany green patina
-
- Vectric Craftsman
- Posts: 260
- Joined: Tue Mar 11, 2014 6:12 pm
- Model of CNC Machine: salecnc XJ1224
- Location: Auckland New Zealand
Re: my turn of the old man
Hi Frank
The finish on that looks way cool is it spray painted or done by hand?. how long did it take to machine?.
regards
Brian
The finish on that looks way cool is it spray painted or done by hand?. how long did it take to machine?.
regards
Brian
-
- Vectric Apprentice
- Posts: 63
- Joined: Mon Sep 19, 2016 8:45 am
- Model of CNC Machine: bravoprodigy be3030
Re: my turn of the old man
HI MTSO
THIS WAS HAND PAINTED TWO COATS WITH A BRUSH STIPPLE EACH COAT BUY DABBING THE BRUSH ALL OVER TO GET RID OF THE BRUSH MARKS APPLY THE PATINA TO THE SECOND COAT WHEN IT IS TOUCH DRY WHEN YOU ARE HAPPY WITH THE AMOUNT OF GREEN AGING SEAL IT BY SPRAYING POLLY THIS STOPS THE PATINA REACTING THIS HAD TWO COATS OF POLLY WHEN DRY BRUSHED ON BLACK BOOT POLISH AND RUBBED OFF WITH A CLOTH
AS FOR TIME TO MACHINE 5HRS TO ROUGH 1/4" END MILL FINISH 1/8" BALL NOSE 6HRS THE STONE WALL 4HRS 1/8" BALL NOSE
THIS WAS HAND PAINTED TWO COATS WITH A BRUSH STIPPLE EACH COAT BUY DABBING THE BRUSH ALL OVER TO GET RID OF THE BRUSH MARKS APPLY THE PATINA TO THE SECOND COAT WHEN IT IS TOUCH DRY WHEN YOU ARE HAPPY WITH THE AMOUNT OF GREEN AGING SEAL IT BY SPRAYING POLLY THIS STOPS THE PATINA REACTING THIS HAD TWO COATS OF POLLY WHEN DRY BRUSHED ON BLACK BOOT POLISH AND RUBBED OFF WITH A CLOTH
AS FOR TIME TO MACHINE 5HRS TO ROUGH 1/4" END MILL FINISH 1/8" BALL NOSE 6HRS THE STONE WALL 4HRS 1/8" BALL NOSE
Re: my turn of the old man
Where can I get the file for this?
frank taylor wrote: ↑Thu Apr 20, 2017 9:00 amfinished size 310mmx290x35mm machined in pine finished with bronze b metal coating then tiffany green patinaSDC10965 bronze old man.jpg
-
- Vectric Apprentice
- Posts: 92
- Joined: Tue Apr 04, 2017 11:44 pm
- Model of CNC Machine: AVID PRO4824
- Location: West Kentucky USA
Re: my turn of the old man
Nice Frank, I never really liked that model until your version.
Isaiah 41-10
-
- Posts: 8
- Joined: Fri Apr 26, 2019 5:15 pm
- Model of CNC Machine: Laguna IQ, Piranha FX
Re: my turn of the old man
I did one too. Mine is ~22" x 24". St Peter never looked so devious! I couldn't just paste it here due to it's size. I had to modify the photo size.
-
- Vectric Craftsman
- Posts: 285
- Joined: Mon Dec 01, 2014 3:53 pm
- Model of CNC Machine: Homemade
Re: my turn of the old man
splendid finish.