Wemme wrote:I made this plaque for a a guy who built his own Cobra.
Most items of the car were scratch built.
He is going to paint the plaque up and will be displayed with the car on car fairs etc.
Unfortunatly the photos didn't come out that great.
Wemme wrote:Hey Stew.
Here you go you need to use the text arc function to put a name in I used a 911 porsche font for my text.
Please note it's metric so if your using inches etc you will have to scale it down etc.
also attached is the eps, if you are going to paint your plaque, have a look on your mates bonnets logo or the net for the correct colour schem.
stewbidasso wrote:Thanks, I am looking forward to trying this out, It really seems to cut nice. Is that cut in MDF? I think I may cut mine in MDF (or possibly in pine if I use that table top piece from the store). I think I will probably use the blue and white color scheme as he has the blue car with the white racing stripes. Thanks again for sharing these files.
Colin P F wrote::D Hi Everone
I couldn't resist playing with the Shelby Cobra Logo Bart put forward, It was produced on a Gravograph IS400 Volume machine, Initially I was printing with another system and just for the fun of it decided to send it to VCarvePro just to see if it could handle it, as you can see it came up with the goods.
Users browsing this forum: No registered users and 10 guests