Three piece chicken dinner
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Three piece chicken dinner
Back when I was a kid, many many years ago, my dad would take small bits of scrap wood from his wood shop and make little things for the kids. While looking for something in my scrap box I ran across one of dad's projects. It made me smile and think back to those times. So I decided to modernize some of the methods and build one of his scrap wood projects using my CNC and some scraps. Kids of all ages get a kick out of them. Great little hand outs. And I believe dad is smiling down on me.
John
Maker of Chips
Maker of Chips
-
- Vectric Craftsman
- Posts: 286
- Joined: Fri May 29, 2015 1:51 am
- Model of CNC Machine: Shop-Made Router
- Location: Arizona
Re: Three piece chicken dinner
that's cute. I was expecting a gag but is still took a few seconds to get the joke.
- BArnold
- Vectric Craftsman
- Posts: 189
- Joined: Sat May 02, 2015 12:20 am
- Model of CNC Machine: SO2/XCarve hybrid w/NEMA23 on all axes
- Location: Thomasville, GA, USA
Re: Three piece chicken dinner
I'm sure your dad would love it! Good work!!!
I'm gonna have to steal the idea!
I'm gonna have to steal the idea!
- galerdude
- Vectric Craftsman
- Posts: 180
- Joined: Sun Dec 12, 2010 7:39 am
- Model of CNC Machine: Joe's 4x4 Hybrid R&P Evolution
- Location: Spokane, WA USA
Re: Three piece chicken dinner
Regards,
Gale
Gale
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Three piece chicken dinner
Here's the file, have fun with it.....BArnold wrote:I'm sure your dad would love it! Good work!!!
I'm gonna have to steal the idea!
John
Maker of Chips
Maker of Chips
- BArnold
- Vectric Craftsman
- Posts: 189
- Joined: Sat May 02, 2015 12:20 am
- Model of CNC Machine: SO2/XCarve hybrid w/NEMA23 on all axes
- Location: Thomasville, GA, USA
Re: Three piece chicken dinner
Thanks!highpockets wrote:Here's the file, have fun with it.....
- zeeway
- Vectric Wizard
- Posts: 3157
- Joined: Thu Feb 11, 2010 9:24 pm
- Model of CNC Machine: Self-built
- Location: SC, USA
Re: Three piece chicken dinner
The chickens thank you.
Angie
Angie
Re: Three piece chicken dinner
Thank you so much for sharing this with us. It really helps a newbie and I believe my grandkids will love it! Thanks again HighPockets !
-
- Posts: 20
- Joined: Sun Feb 05, 2017 4:21 pm
- Model of CNC Machine: Shapeoko 3 XXL
- Location: Canton, Michigan USA
Re: Three piece chicken dinner
With regard to the lettering. How did you do the black? Did you spray them black then sand off the excess leaving the letters black?
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Three piece chicken dinner
Used a paint brush then sanded the excess off.Flubadub wrote:With regard to the lettering. How did you do the black? Did you spray them black then sand off the excess leaving the letters black?
John
Maker of Chips
Maker of Chips
- martin54
- Vectric Archimage
- Posts: 7353
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Three piece chicken dinner
Most of the kids I know now days would be looking for the USB or Audio Jack socket if you gave then that
- dwilli9013
- Vectric Wizard
- Posts: 1237
- Joined: Mon Sep 30, 2013 12:45 am
- Model of CNC Machine: 3 axis Self Designed Self Built
- Location: Machesney Park Illinois
Re: Three piece chicken dinner
Nice
I have seen a variant of that it says "Winner Winner Chicken Dinner" then you open the box and it's a hard boiled egg.
Think I like this one better though.
And your are right Martin now days alot of the younger set would quickly tire of this as it does not have any electronics.
Sad but a true part of this era.
I have seen a variant of that it says "Winner Winner Chicken Dinner" then you open the box and it's a hard boiled egg.
Think I like this one better though.
And your are right Martin now days alot of the younger set would quickly tire of this as it does not have any electronics.
Sad but a true part of this era.
D-Dub
Dwayne
Dwilli
Dwayne
Dwilli
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Three piece chicken dinner
Hadn't thought about that, wonder what would happen if I carved a USB port in the sidemartin54 wrote:Most of the kids I know now days would be looking for the USB or Audio Jack socket if you gave then that
John
Maker of Chips
Maker of Chips
- dwilli9013
- Vectric Wizard
- Posts: 1237
- Joined: Mon Sep 30, 2013 12:45 am
- Model of CNC Machine: 3 axis Self Designed Self Built
- Location: Machesney Park Illinois
Re: Three piece chicken dinner
That would be awesome or just cut out a spot for one and push an old usb port in it.highpockets wrote:Hadn't thought about that, wonder what would happen if I carved a USB port in the sidemartin54 wrote:Most of the kids I know now days would be looking for the USB or Audio Jack socket if you gave then that
It would be hours of laughter for the older set.
D-Dub
Dwayne
Dwilli
Dwayne
Dwilli
- Todd Bailey
- Vectric Staff
- Posts: 625
- Joined: Mon Nov 24, 2014 8:40 pm
- Model of CNC Machine: CraftCNC
- Contact:
Re: Three piece chicken dinner
Made me laugh!!! Nice little project... totally fun! Thanks for sharing.
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com
Todd Bailey | Design and Make
DesignAndMake.com