excitech shm-0609 cnc router

Post Reply
frank taylor
Vectric Apprentice
Posts: 63
Joined: Mon Sep 19, 2016 8:45 am
Model of CNC Machine: bravoprodigy be3030

excitech shm-0609 cnc router

Post by frank taylor »

hi guys just updated to new cnc router problem x axes going in y axes direction and vise versa for y axes any way to get it back to normal???

User avatar
martin54
Vectric Archimage
Posts: 7339
Joined: Fri Nov 09, 2012 2:12 pm
Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
Location: Kirkcaldy, Scotland

Re: excitech shm-0609 cnc router

Post by martin54 »

You should be able to just switch the leads over :lol: :lol:
what control software are you running ??

frank taylor
Vectric Apprentice
Posts: 63
Joined: Mon Sep 19, 2016 8:45 am
Model of CNC Machine: bravoprodigy be3030

Re: excitech shm-0609 cnc router

Post by frank taylor »

hi martin
control system nk105g2 hand controller nc studio

User avatar
martin54
Vectric Archimage
Posts: 7339
Joined: Fri Nov 09, 2012 2:12 pm
Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
Location: Kirkcaldy, Scotland

Re: excitech shm-0609 cnc router

Post by martin54 »

OK I'm not familiar with NC Studio but you may need to alter one of the settings in there.
Like I said you should be able to just switch the leads over at the control box end, once you have done that you may find one or both of your axis are now running the wrong way ( negative movement where it should be positive). There should be a way to change the direction in NC Studio set up. I would guess that the hardware (screws/belts & motors ) for the x & y axis are the same so no need to alter the axis calibration but you should check it anyway :lol: :lol:

Post Reply