Source for dust boot brush strip

[Phil]

Found this on E-bay. Very reasonable price for 1" x 5' flexible brush strip.
http://www.ebay.com/itm/like/1318895851 ... noapp=true

Phil

[dhellew2]

https://www.mcmaster.com/#brush-strips/=15gtjnj
Another source
Dale

[Xxray]

1" bristles ?
A little on the short side I would say.

[Mike-S]

Try Kent's
https://www.kentcnc.net/nc/accessories-1-1

[glenninvb]

The easy cut brush with the #1 holder work great, inexpensive and available in 1-3"
If you make a couple magnetic bases using 1" and 3" length, they will accommodate most length cutters

about 3/4 down page
https://www.mcmaster.com/#conveyor-stri ... s/=15hb0f8

[Bobtail Farm]

And up to 6" from Zorro (but with metal channel for the longest length - a little more challenging to bend, but doable).