Diamond drag tool test.

This forum is for users to post tips and tricks they have found useful while working with VCarve Pro

Diamond drag tool test.

Postby FixitMike » Tue Nov 08, 2016 12:57 am

I wanted to find out what differences were made with different settings for a diamond drag tool using the Quick Engrave toolpath and an offset fill, so I ran this test on a piece of 1/4" acrylic.

The Photo shows that although there are not major differences with various tool depth and line stepover settings, the best result seems to be with the lightest setting and the largest stepover. (Also, the largest stepover will take the least time to cut.)

The drag tool was purchased on E-bay. http://www.ebay.com/itm/CNC-DRAG-ENGRAV ... SwPc9WzRo0

Drag tool test (2).JPG
Good judgement comes from experience.
Experience comes from bad judgement.
User avatar
FixitMike
Vectric Wizard
 
Posts: 1533
Joined: Sun Apr 17, 2011 5:21 am
Location: Renton, WA USA
Model of CNC Machine: Shark Pro Plus (extensively modified)

Re: Diamond drag tool test.

Postby Xxray » Tue Nov 08, 2016 1:55 am

Wow, now thats what I call a proper test.

I tried much the same somewhere in this thread and I ended up baffling myself by being sloppy documenting my effort

viewtopic.php?f=27&t=23152
Doug
User avatar
Xxray
Vectric Wizard
 
Posts: 1934
Joined: Thu Feb 17, 2011 8:47 am
Location: MI USA
Model of CNC Machine: CAMaster Stinger 1

Re: Diamond drag tool test.

Postby dwilli9013 » Tue Nov 08, 2016 2:26 am

Nice test. Clears of some areas I had in question.
D-Dub
Dwayne
Dwilli
User avatar
dwilli9013
Vectric Wizard
 
Posts: 1214
Joined: Mon Sep 30, 2013 12:45 am
Location: Machesney Park Illinois
Model of CNC Machine: 3 axis Self Designed Self Built


Return to VCarve - Tips and Tricks

Who is online

Users browsing this forum: No registered users and 1 guest