laser connector problem
-
- Posts: 6
- Joined: Mon Oct 24, 2016 4:25 pm
- Model of CNC Machine: shark hd4
laser connector problem
the shelf under my cnc not real well thought out a I caught the wires pulled it out as it dangled the wires for the laser pulled out of their pins. I can easily repair it but need to know what sockets each of the 4 wires from the laser go in?? help !!
-
- Posts: 6
- Joined: Mon Oct 24, 2016 4:25 pm
- Model of CNC Machine: shark hd4
Re: laser connector problem
nobody has the laser and can look at the connector ?? bumming
- FixitMike
- Vectric Wizard
- Posts: 2173
- Joined: Sun Apr 17, 2011 5:21 am
- Model of CNC Machine: Shark Pro Plus (retired)
- Location: Burien, WA USA
Re: laser connector problem
There are at least 25 different brands of CNCs, each of which has different models. Posting your brand and model would help. Also a photo of the area in question.
This forum is primarily for discussing the use of Vectric software. Hardware questions are best answered by the manufacturers and on their forums.
This forum is primarily for discussing the use of Vectric software. Hardware questions are best answered by the manufacturers and on their forums.
Good judgement comes from experience.
Experience comes from bad judgement.
Experience comes from bad judgement.
-
- Posts: 6
- Joined: Mon Oct 24, 2016 4:25 pm
- Model of CNC Machine: shark hd4
Re: laser connector problem
The machince I have is a shark HD4 , the laser I got from rockler but I believe it is also a next wave automation product same as the shark. Thanks!!
-
- Vectric Apprentice
- Posts: 62
- Joined: Wed Dec 29, 2010 8:03 pm
- Model of CNC Machine: XYZ Gantry, PMDX motion, Mach3
- Location: Sylvania, Ohio, USA
Re: laser connector problem
contact nextwave automation I am sure they will be able to help. www.nextwaveautomation.com
Hope this helps
Hope this helps