No gadgets have anything to install
No gadgets have anything to install
I have been trying to install the dovetail gadget but when i install it it shows 0.00 kb and nothing is available to install from the list? I also tried the point cloud gadget as well. I am running aspire v8.20. Any ideas? Ive tried disabling virus scan, and I have run the aspire update.
- Rcnewcomb
- Vectric Archimage
- Posts: 5915
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: No gadgets have anything to install
I just downloaded and installed the Dovetail gadget from this link: ->Link
It should download as a 211KB file.
It should download as a 211KB file.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- Adrian
- Vectric Archimage
- Posts: 14652
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: No gadgets have anything to install
Are you running VCarve Pro or VCarve Desktop? The gadgets only work in Pro.
Re: No gadgets have anything to install
I tried that download and no luck. It still shows up as 0kb when choosing components to install.
Re: No gadgets have anything to install
Adrian wrote:Are you running VCarve Pro or VCarve Desktop? The gadgets only work in Pro.
Im running Aspire 8
- Adrian
- Vectric Archimage
- Posts: 14652
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: No gadgets have anything to install
You'll need to contact support directly at support@vectric.com I would think as it's not a problem others are having by the look of it.
Re: No gadgets have anything to install
Nope... I have the same exact problem as well (Aspire 8.0 User here).
The only Gadgets that will install are the pre-installed ones - who work great.
When I try to install a Gadget, it downloads with the correct size, but when the installer runs, the list of objects to install is 'empty', so the install finishes running (installing nothing) and then closes. Nice tease but thats all.
The only Gadgets that will install are the pre-installed ones - who work great.
When I try to install a Gadget, it downloads with the correct size, but when the installer runs, the list of objects to install is 'empty', so the install finishes running (installing nothing) and then closes. Nice tease but thats all.
- Adrian
- Vectric Archimage
- Posts: 14652
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: No gadgets have anything to install
Same reply though. You'll need to contact support directly as it's not something us fellow users can really help with.
I'd say it's most likely some sort of permissions problem as the pre-installed gadgets are in a different location to the downloaded one but that's a guess on my part.
I'd say it's most likely some sort of permissions problem as the pre-installed gadgets are in a different location to the downloaded one but that's a guess on my part.
- Ms Wolffie
- Vectric Wizard
- Posts: 2695
- Joined: Sat Mar 31, 2012 10:41 pm
- Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
- Location: Tully Heads, Wet Tropics, Queensland, Australia
Re: No gadgets have anything to install
I just downloaded successfully from the same link.
Did you run the download and then remember to restart?
Did you run the download and then remember to restart?
Cheers
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: No gadgets have anything to install
Make sure it's in and installs from the correct folder.
Only VCP8 here, but when I upgraded the new gadgets it stuck them in VCP7.5 and I had to go in and drag/drop them into the correct 8 folder.
scott
Only VCP8 here, but when I upgraded the new gadgets it stuck them in VCP7.5 and I had to go in and drag/drop them into the correct 8 folder.
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
- Leo
- Vectric Wizard
- Posts: 4090
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: No gadgets have anything to install
I just downloaded and installed the dovetail gadget that Randal posted.
I have the latest version of Aspire
I tried it and it works fine
The file size was 212 as Randall posted
I did not have it previously installed.
I installed it directly from the download in the Foxfire download icon area at the top right area of the foxfire menu.
I have the latest version of Aspire
I tried it and it works fine
The file size was 212 as Randall posted
I did not have it previously installed.
I installed it directly from the download in the Foxfire download icon area at the top right area of the foxfire menu.
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC
-
- Posts: 2
- Joined: Tue Oct 11, 2016 9:02 pm
- Model of CNC Machine: Camaster Stinger 2 / Tormach 770 PCNC
Re: No gadgets have anything to install
I am also having this issue using VCarve Pro 8.5.
When I try to install the select components to install is blank and the space required is 0.0kb.
Thanks for help in advance.
When I try to install the select components to install is blank and the space required is 0.0kb.
Thanks for help in advance.
- Adrian
- Vectric Archimage
- Posts: 14652
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: No gadgets have anything to install
Registered version or trial version? Gadgets don't work in the trial version. If it's the full registered version you'll need to contact support directly.
-
- Posts: 2
- Joined: Tue Oct 11, 2016 9:02 pm
- Model of CNC Machine: Camaster Stinger 2 / Tormach 770 PCNC
Re: No gadgets have anything to install
Thanks...
It is a fully registered version.
It is a fully registered version.