cnc drive belt.

Post Reply
bikerbri
Posts: 11
Joined: Sun Jul 31, 2016 12:48 pm
Model of CNC Machine: stepcraft 600

cnc drive belt.

Post by bikerbri »

Any one know where I can get a drive belt for a Step-craft 600v2 in the UK, I believe it,s a T2, 5x 1020 any help would be appreciated.

tom klass
Vectric Craftsman
Posts: 101
Joined: Tue Apr 16, 2013 1:06 am
Model of CNC Machine: camaster stinger1 with recoil
Location: Hamburg, New York

Re: cnc drive belt.

Post by tom klass »

Try McMaster-Carr here in the USA they might have something that can replace it with. I didn't find the exact match to that number but I don't really know where you can make changes. Good Luck

bikerbri
Posts: 11
Joined: Sun Jul 31, 2016 12:48 pm
Model of CNC Machine: stepcraft 600

Re: cnc drive belt.

Post by bikerbri »

Thanks for the reply Sir.

JoeM
Vectric Craftsman
Posts: 286
Joined: Fri May 29, 2015 1:51 am
Model of CNC Machine: Shop-Made Router
Location: Arizona

Re: cnc drive belt.

Post by JoeM »

Are you sure about those numbers? There's GT2 and there's T2.5 (and GT3, T5 and ???). Is the 5x the pitch or 5mm width? I assume 1020 is the length in mm.

Stepcraft US isn't much help because their page for buying a replacement belt for the 600 has the specs for the 840:
https://stepcraft.us/product/part-73-dr ... r-sc-2600/
The length of that one is 1380 - it would suck to buy that and find out it's too long.

Maybe you could contact the good people of StoneyCNC. They claim to be the sole seller of Stepcraft products in your area.
http://stoneycnc.co.uk/stepcraft-overview/

bikerbri
Posts: 11
Joined: Sun Jul 31, 2016 12:48 pm
Model of CNC Machine: stepcraft 600

Re: cnc drive belt.

Post by bikerbri »

Stoney CNC are sorting out one for me but it will take a week before posting as they are on shutdown until the 29th, I found several places selling it by the meter but I have no idea how to join it ?.
t = timing belt 2.5 = a metric pitch of 2.5 mm and it comes in various widths mine being 6 mm .

Jennifer
Posts: 5
Joined: Mon Nov 14, 2016 11:53 am
Model of CNC Machine: 1000 x 750mm CNC router 3axis
Location: Bridlington, East Riding of Yorkshire

Re: cnc drive belt.

Post by Jennifer »

Hi there,

I know this is an old post, and I hope that by now you have found a replacement belt. For future reference try these guys located here in the U.K.

I own a belt driven OX by ooznest, it uses six mm belts. They sell them on their web site. I have found them to be very respponsive via email whenever I have had questions.

Here is a link to their belts for sale section of their web site: http://ooznest.co.uk/3D-Printer-Mechani ... ts-Pulleys

Jen

Post Reply