lasered wren styled bird house

This is the place to post images of work produced using Aspire
Post Reply
stankern
Vectric Wizard
Posts: 669
Joined: Tue Nov 27, 2007 3:21 pm
Location: ontario canada

lasered wren styled bird house

Post by stankern »

did this lasered style wren house for kids to easily assemble (used aspire 8.5 for the files)

bird house
Attachments
one.jpg
three.jpg
two.jpg

stankern
Vectric Wizard
Posts: 669
Joined: Tue Nov 27, 2007 3:21 pm
Location: ontario canada

Re: lasered wren styled bird house

Post by stankern »

Because this was a vector diagram I re-sized the diagram by 150% ,and re-sized the slots
The tabs turned out to be 3/16 too long but the radial arm saw fixed that quick
If I spent the time and re-sized everything on the diagram then it would be a perfect fit like the original
But I did not want this to go on and on
This was an exercise of a quick bird house for kids to assemble
Attachments
village1.jpg
village2.jpg
village3.jpg

stankern
Vectric Wizard
Posts: 669
Joined: Tue Nov 27, 2007 3:21 pm
Location: ontario canada

Re: lasered wren styled bird house

Post by stankern »

the second cut
Attachments
IMG_0010.JPG
IMG_0013.JPG

spyderxxx
Vectric Craftsman
Posts: 102
Joined: Sat Oct 06, 2012 11:51 am
Model of CNC Machine: my own design
Location: Cambridge Ontario

Re: lasered wren styled bird house

Post by spyderxxx »

Stan

Where did you find the plan? Would love to build this.

Ed

jwoodworke@aol.com
Posts: 5
Joined: Wed Nov 04, 2015 1:47 am
Model of CNC Machine: DIY CNC router running Cut2D v9.0

Re: lasered wren styled bird house

Post by jwoodworke@aol.com »

Love this design! My homebrew CNC Router is almost online, and I m intending to run Vectric's 2D Cam package. I noticed you have Aspire. I should be able to execute this design (or something similar) with 2D, right?

User avatar
martin54
Vectric Archimage
Posts: 7339
Joined: Fri Nov 09, 2012 2:12 pm
Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
Location: Kirkcaldy, Scotland

Re: lasered wren styled bird house

Post by martin54 »

spyderxxx wrote:Stan

Where did you find the plan? Would love to build this.

Ed
Don't know where this particular plan came from but there are quite a few different styles on makecnc.com if you search for bird house :lol: :lol:
It would be pretty easy to draw your own version as well :lol: :lol:

User avatar
martin54
Vectric Archimage
Posts: 7339
Joined: Fri Nov 09, 2012 2:12 pm
Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
Location: Kirkcaldy, Scotland

Re: lasered wren styled bird house

Post by martin54 »

jwoodworke@aol.com wrote:Love this design! My homebrew CNC Router is almost online, and I m intending to run Vectric's 2D Cam package. I noticed you have Aspire. I should be able to execute this design (or something similar) with 2D, right?
Looking at it I can't see anything that would require anything more than simple pocket & profile cutting so yes cut2d would be suitable for a job like this :lol:

Post Reply