As many of you know, I work in and on religious building here and around the world.
This is a project we just completed the other day.
It was a repair / restoration of an existing wooden frame for the main stained glass window.
We replaced about 85% of the existing wood due to dry rot.
The frame was about 15’ x 25’.
And, if you know anything about me, you’ll know that I just can’t keep my imagination in check,,so I added a bit of detail to an otherwise dull looking frame.
You’ll recognize some of the 3-D clipart from your Aspire and V-Carve programs....
The client was amazed how well it turned out....I had not doubt......
Michael
The work we do
-
- Vectric Craftsman
- Posts: 233
- Joined: Sat Feb 23, 2013 11:47 pm
- Model of CNC Machine: home built
Re: The work we do
Great job
- scottp55
- Vectric Wizard
- Posts: 4713
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: The work we do
Meaningful work, well done!
Congrats Michael!!
scott
Congrats Michael!!
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
- Vectric Wizard
- Posts: 669
- Joined: Thu Apr 15, 2010 10:03 pm
- Model of CNC Machine: SHOPBOT BUDDY PRS 32, 4 FT PWR STICK
- Location: SOUTH CENTRAL COLORADO
Re: The work we do
you work is always incredible. from now on when you do a file for me somehow you need to autograph it for me. : ) just kidding.
Re: The work we do
Beautiful work - but then that is your normal mode!