## How do you draw a line a certain distance from another line?

This section is for useful tips and tricks for Aspire

### How do you draw a line a certain distance from another line?

I have a diagonal line drawn. I would like a second, diagonal line 0.6" from the first, what is the easy way to do this? I am having to draw the two lines and then get the tape measure, measure it and move it again and re-measure...

Thanks!
OPM

Posts: 2
Joined: Thu Jun 23, 2016 4:19 am
Model of CNC Machine: Industrial Artisan 408

### Re: How do you draw a line a certain distance from another l

One version:
Draw line 1
Ctrl +C to copy
Ctrl + V to paste (line 2 is selected)
M (move) > select relative set distance to .6
Gary Campbell
CNC Technology & Training
The Ultimate Woodworking Machine
GCnC411 (at) gmail.com

IslaWW
Vectric Wizard

Posts: 1246
Joined: Wed Nov 21, 2007 11:42 pm
Location: Marquette, MI, USA
Model of CNC Machine: The Ultimate Woodworking Machine

### Re: How do you draw a line a certain distance from another l

If you need the lines to be a certain perpendicular distance apart,
1) Draw a circle with the centre at the end of the line, radius=the separation needed
2) do as Gary said
3) Move the new line until it is tangent to the circle (touching only at one point)
Paul Rowntree
WarpDriver, StandingWave, Topo and gadgets available at PaulRowntree.weebly.com
PaulRowntree
Vectric Wizard

Posts: 1687
Joined: Sun Oct 24, 2010 7:28 pm
Location: Guelph, Ontario
Model of CNC Machine: homebuilt 4'x2' (Mach3+G540)

### Re: How do you draw a line a certain distance from another l

OPM wrote:I have a diagonal line drawn. I would like a second, diagonal line 0.6" from the first, what is the easy way to do this? I am having to draw the two lines and then get the tape measure, measure it and move it again and re-measure...

Thanks!

Use the 'Offset Selected Vectors' Button, bottom Left.
Imagineering
Vectric Apprentice

Posts: 46
Joined: Fri Sep 21, 2012 3:56 am
Location: New Zealand
Model of CNC Machine: Self Built Router and Sieg SX3

### Re: How do you draw a line a certain distance from another l

I would do offset
Imagine the Possibilities of a Creative mind

www.leosworkshop.com

Leo
Vectric Wizard

Posts: 2934
Joined: Sat Jul 14, 2007 3:02 am
Location: East Freetown, Ma.
Model of CNC Machine: 1300 x 1300 x 254

### Re: How do you draw a line a certain distance from another l

Perfect! Thanks so much guys!
OPM

Posts: 2
Joined: Thu Jun 23, 2016 4:19 am
Model of CNC Machine: Industrial Artisan 408

Return to Aspire - Tips and Tricks

### Who is online

Users browsing this forum: No registered users and 1 guest