The New Map Thread - Show us where you are in the world

This forum is for users to submit their own gadgets to the community

Re: The New Map Thread - Show us where you are in the world

Postby Robert L » Mon May 09, 2016 2:10 am

Robert L Stewart
San Diego, CA USA
Robert L
Vectric Apprentice
 
Posts: 96
Joined: Sun Dec 21, 2014 7:32 pm
Model of CNC Machine: Multicam

Re: The New Map Thread - Show us where you are in the world

Postby InstrumentTech » Mon May 09, 2016 6:47 pm

St. John's, Newfoundland, Canada
InstrumentTech
 
Posts: 32
Joined: Tue May 03, 2016 4:33 pm
Model of CNC Machine: Stepcraft 2/840

Re: The New Map Thread - Show us where you are in the world

Postby FixitMike » Mon May 09, 2016 7:04 pm

Renton, WA 98059
Good judgement comes from experience.
Experience comes from bad judgement.
User avatar
FixitMike
Vectric Wizard
 
Posts: 1582
Joined: Sun Apr 17, 2011 5:21 am
Location: Renton, WA USA
Model of CNC Machine: Shark Pro Plus (extensively modified)

Re: The New Map Thread - Show us where you are in the world

Postby morsan » Tue May 10, 2016 2:30 pm

FabLab NTNU,
Aalesund, Norway
morsan
Vectric Apprentice
 
Posts: 5
Joined: Tue May 10, 2016 8:35 am
Location: Aalesund, Norway
Model of CNC Machine: High-Z S-1000 T

Re: The New Map Thread - Show us where you are in the world

Postby woodbine » Sat May 14, 2016 9:55 pm

brewwood in North Prairie Wi USA
woodbine
 
Posts: 3
Joined: Wed Nov 26, 2014 1:31 am
Location: North Prairie Wisconsin USA
Model of CNC Machine: Shark

Re: The New Map Thread - Show us where you are in the world

Postby debtkiller » Fri May 20, 2016 9:15 am

Narohstore
San Antonio, Texas 78223

Please add me to the map
debtkiller
 
Posts: 1
Joined: Wed Mar 30, 2016 10:12 am
Model of CNC Machine: CNC Piranha Fx

Re: The New Map Thread - Show us where you are in the world

Postby ekparsons » Fri May 20, 2016 3:17 pm

Eric Parsons Palm Beach Gardens, FL
ekparsons
 
Posts: 7
Joined: Fri May 20, 2016 9:14 am
Model of CNC Machine: PDJ Pilot Pro 5050

Re: The New Map Thread - Show us where you are in the world

Postby Davima » Fri May 20, 2016 4:46 pm

How do I mark the map
Davima
Vectric Apprentice
 
Posts: 1
Joined: Thu May 19, 2016 1:45 am
Model of CNC Machine: Shark 3d

Re: The New Map Thread - Show us where you are in the world

Postby tonydude919 » Sat May 21, 2016 10:03 pm

Davima,

You don't, somebody else does. You just say what your name is and where you are from, they do the rest.

Tony
What will matter is not what you bought but what you built; not what you got, but what you gave
tonydude919
Vectric Wizard
 
Posts: 761
Joined: Sat Jan 09, 2010 7:28 am
Location: Buffalo,NY
Model of CNC Machine: cnc mako shark ext bed with HD 5 gantry

Re: The New Map Thread - Show us where you are in the world

Postby Dale1944 » Sat May 21, 2016 10:45 pm

Dale Heideman
Capon Bridge, WV 26711
Dale1944
 
Posts: 39
Joined: Tue Aug 26, 2014 3:03 am
Model of CNC Machine: CNC Router Homemade

Re: The New Map Thread - Show us where you are in the world

Postby backyard_cnc » Sun May 22, 2016 11:33 pm

Winnipeg, Manitoba, r2m 1e6
User avatar
backyard_cnc
Vectric Craftsman
 
Posts: 237
Joined: Mon Aug 31, 2009 4:41 am
Location: winnipeg, manitoba, Canada
Model of CNC Machine: SHOPBOT, LIGHTMACHINES MILL, AJAXCNC-KNE

Re: The New Map Thread - Show us where you are in the world

Postby rcramer37 » Tue May 24, 2016 6:23 pm

Chattanooga, TN
rcramer37
 
Posts: 2
Joined: Mon May 09, 2016 4:00 pm
Model of CNC Machine: Digital Wood Carver

Re: The New Map Thread - Show us where you are in the world

Postby Fred Grover » Thu May 26, 2016 11:24 pm

Fred Grover
Ottumwa, IA. 52501

Aspire 8 and CNC Pilot Pro 5050

Curious to how many other users are from Iowa as it only shows 4 on the Map but does not give addresses or contact information. Looking for other Aspire Users here in Iowa to get together with if possible. Thanks.
Fred Grover
 
Posts: 36
Joined: Thu Feb 04, 2016 5:06 am
Model of CNC Machine: CNC Pilot Pro 5050

Re: The New Map Thread - Show us where you are in the world

Postby liaoh75 » Sun May 29, 2016 1:21 pm

I'm in Taiwan.

Address:

143 Chongwen Street 3F
Chiayi City, Taiwan 600
R.O.C.

Looks like I'm the only one using this great software here.
Aspire - Older Version. Haven't had the funds to upgrade but one day, I will. Good to support a company like Vectric. Great user base and the forum is most valuable. Thanks to the Vectric team and those that help us out on the forum. Cheers!
liaoh75
 
Posts: 7
Joined: Sat Oct 11, 2008 4:06 pm

Re: The New Map Thread - Show us where you are in the world

Postby fairsnpomona » Sat Jun 04, 2016 9:22 am

I am ready for the world to see me. Pasadena, Ca.
thanks, John
fairsnpomona
 
Posts: 6
Joined: Fri Aug 21, 2015 7:38 am
Model of CNC Machine: probotix comet

PreviousNext

Return to Gadgets - User Submissions

Who is online

Users browsing this forum: No registered users and 2 guests