The New Map Thread - Show us where you are in the world

Post general information and questions relating to Cut2D in this Forum.
Robert L
Vectric Craftsman
Posts: 120
Joined: Sun Dec 21, 2014 7:32 pm
Model of CNC Machine: Multicam

Re: The New Map Thread - Show us where you are in the world

Post by Robert L »

Robert L Stewart
San Diego, CA USA

InstrumentTech
Posts: 34
Joined: Tue May 03, 2016 4:33 pm
Model of CNC Machine: Stepcraft 2/840

Re: The New Map Thread - Show us where you are in the world

Post by InstrumentTech »

St. John's, Newfoundland, Canada

User avatar
FixitMike
Vectric Wizard
Posts: 2173
Joined: Sun Apr 17, 2011 5:21 am
Model of CNC Machine: Shark Pro Plus (retired)
Location: Burien, WA USA

Re: The New Map Thread - Show us where you are in the world

Post by FixitMike »

Renton, WA 98059
Good judgement comes from experience.
Experience comes from bad judgement.

morsan
Posts: 5
Joined: Tue May 10, 2016 8:35 am
Model of CNC Machine: High-Z S-1000 T
Location: Aalesund, Norway

Re: The New Map Thread - Show us where you are in the world

Post by morsan »

FabLab NTNU,
Aalesund, Norway

woodbine
Posts: 3
Joined: Wed Nov 26, 2014 1:31 am
Model of CNC Machine: Shark
Location: North Prairie Wisconsin USA

Re: The New Map Thread - Show us where you are in the world

Post by woodbine »

brewwood in North Prairie Wi USA

debtkiller
Posts: 1
Joined: Wed Mar 30, 2016 10:12 am
Model of CNC Machine: CNC Piranha Fx

Re: The New Map Thread - Show us where you are in the world

Post by debtkiller »

Narohstore
San Antonio, Texas 78223

Please add me to the map

ekparsons
Posts: 15
Joined: Fri May 20, 2016 9:14 am
Model of CNC Machine: PDJ Pilot Pro 5050

Re: The New Map Thread - Show us where you are in the world

Post by ekparsons »

Eric Parsons Palm Beach Gardens, FL

Davima
Posts: 1
Joined: Thu May 19, 2016 1:45 am
Model of CNC Machine: Shark 3d

Re: The New Map Thread - Show us where you are in the world

Post by Davima »

How do I mark the map

tonydude919
Vectric Wizard
Posts: 771
Joined: Sat Jan 09, 2010 7:28 am
Model of CNC Machine: cnc mako shark ext bed with HD 5 gantry
Location: Buffalo,NY

Re: The New Map Thread - Show us where you are in the world

Post by tonydude919 »

Davima,

You don't, somebody else does. You just say what your name is and where you are from, they do the rest.

Tony
What will matter is not what you bought but what you built; not what you got, but what you gave

Dale1944
Posts: 48
Joined: Tue Aug 26, 2014 3:03 am
Model of CNC Machine: CNC Router Homemade

Re: The New Map Thread - Show us where you are in the world

Post by Dale1944 »

Dale Heideman
Capon Bridge, WV 26711

User avatar
backyard_cnc
Vectric Craftsman
Posts: 237
Joined: Mon Aug 31, 2009 4:41 am
Model of CNC Machine: SHOPBOT, LIGHTMACHINES MILL, AJAXCNC-KNE
Location: winnipeg, manitoba, Canada

Re: The New Map Thread - Show us where you are in the world

Post by backyard_cnc »

Winnipeg, Manitoba, r2m 1e6

rcramer37
Posts: 3
Joined: Mon May 09, 2016 4:00 pm
Model of CNC Machine: Digital Wood Carver

Re: The New Map Thread - Show us where you are in the world

Post by rcramer37 »

Chattanooga, TN

Fred Grover
Posts: 39
Joined: Thu Feb 04, 2016 5:06 am
Model of CNC Machine: CNC Pilot Pro 5050

Re: The New Map Thread - Show us where you are in the world

Post by Fred Grover »

Fred Grover
Ottumwa, IA. 52501

Aspire 8 and CNC Pilot Pro 5050

Curious to how many other users are from Iowa as it only shows 4 on the Map but does not give addresses or contact information. Looking for other Aspire Users here in Iowa to get together with if possible. Thanks.

liaoh75
Posts: 7
Joined: Sat Oct 11, 2008 4:06 pm

Re: The New Map Thread - Show us where you are in the world

Post by liaoh75 »

I'm in Taiwan.

Address:

143 Chongwen Street 3F
Chiayi City, Taiwan 600
R.O.C.

Looks like I'm the only one using this great software here.
Aspire - Older Version. Haven't had the funds to upgrade but one day, I will. Good to support a company like Vectric. Great user base and the forum is most valuable. Thanks to the Vectric team and those that help us out on the forum. Cheers!

fairsnpomona
Posts: 6
Joined: Fri Aug 21, 2015 7:38 am
Model of CNC Machine: probotix comet

Re: The New Map Thread - Show us where you are in the world

Post by fairsnpomona »

I am ready for the world to see me. Pasadena, Ca.
thanks, John

Post Reply