Frankenswitch instructions and files.
- FixitMike
- Vectric Wizard
- Posts: 2177
- Joined: Sun Apr 17, 2011 5:21 am
- Model of CNC Machine: Shark Pro Plus (retired)
- Location: Burien, WA USA
Frankenswitch instructions and files.
VCarve Pro 8.024 files and an instruction document.
Good judgement comes from experience.
Experience comes from bad judgement.
Experience comes from bad judgement.
- lockeyone
- Vectric Craftsman
- Posts: 147
- Joined: Thu Dec 07, 2006 4:45 am
- Model of CNC Machine: other software 50-50 router, Mach3, Epilog 60W
- Location: Schofield, Wisconsin, USA
- Contact:
Re: Frankenswitch instructions and files.
Thanks, definitely something I would like to do.
If you want to kill time, why not work it to death!
-
- Vectric Apprentice
- Posts: 91
- Joined: Wed Dec 28, 2011 2:47 am
- Model of CNC Machine: Home Built
- Location: Lloydminster, Alberta, Canada
Re: Frankenswitch instructions and files.
Thanks, Mike
-
- Vectric Apprentice
- Posts: 67
- Joined: Wed Dec 03, 2014 5:33 pm
- Model of CNC Machine: GarageWorX 18"x24"' using VCarvePro V10
- Location: Westerville, OHIO
Re: Frankenswitch instructions and files.
Yes, thank you. I can see one of these in a grand-childs room in the future
Grant "gad5264"
Westerville, OH
Westerville, OH
Re: Frankenswitch instructions and files.
Thank you! Looks like fun.
Ken Zey
Rogers, AR
http://www.CedarSlabSigns.com
http://www.lookoutmercantile.com
Shopbot PRS Alpha 72x144
Rogers, AR
http://www.CedarSlabSigns.com
http://www.lookoutmercantile.com
Shopbot PRS Alpha 72x144
- mikeacg
- Vectric Wizard
- Posts: 659
- Joined: Sun Nov 02, 2008 10:53 pm
- Model of CNC Machine: Camaster Stinger, Sidewinder, SB 4x4
- Location: Newberry, MI
- Contact:
Re: Frankenswitch instructions and files.
Mike,
Thanks for sharing these files!
Mike
Thanks for sharing these files!
Mike
- martin54
- Vectric Archimage
- Posts: 7355
- Joined: Fri Nov 09, 2012 2:12 pm
- Model of CNC Machine: Gerber 48, Triac PC, Isel fixed gantry
- Location: Kirkcaldy, Scotland
Re: Frankenswitch instructions and files.
Likewise, thanks Mike although I haven't got a clue when I am going to be able to find the time to make one with all the other stuff I have to make first
- FixitMike
- Vectric Wizard
- Posts: 2177
- Joined: Sun Apr 17, 2011 5:21 am
- Model of CNC Machine: Shark Pro Plus (retired)
- Location: Burien, WA USA
Re: Frankenswitch instructions and files.
Please add to the instructions:
If the assembled operator is too loose and the handle won't stay up when the light is on, glue some felt to the side(s) of the side plate assembly to add some sliding friction.
If the assembled operator is too loose and the handle won't stay up when the light is on, glue some felt to the side(s) of the side plate assembly to add some sliding friction.
Good judgement comes from experience.
Experience comes from bad judgement.
Experience comes from bad judgement.
- gordread
- Vectric Wizard
- Posts: 382
- Joined: Sun Jul 08, 2012 3:29 am
- Model of CNC Machine: CNC Professor HDX
- Location: Onoway, Alberta
- Contact:
Re: Frankenswitch instructions and files.
Very Nice. Thanks Mike. I now have (another) project for this weekend.
Gordon
Gordon
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Frankenswitch instructions and files.
Thanks Mike, looking forward to making a few for the kids.
John
Maker of Chips
Maker of Chips
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: Frankenswitch instructions and files.
I've had it on the list of things to do for quite some time, finally got around to it and just in time for grandson's birthday.
Thanks again Mike!!!
Thanks again Mike!!!
John
Maker of Chips
Maker of Chips
- llwood
- Vectric Wizard
- Posts: 392
- Joined: Sun Nov 18, 2012 5:07 pm
- Model of CNC Machine: Legacy Maverick
- Location: Dillsburg, PA
- Contact:
Re: Frankenswitch instructions and files.
Clever idea!
-
- Posts: 7
- Joined: Thu Jan 12, 2017 6:06 pm
- Model of CNC Machine: Ooznest Ox-CNC (Self build)1000mmX1000mm
- Location: Baildon, West Yorkshire,UK
Re: Frankenswitch instructions and files.
Thanks for the files Mike
-
- Vectric Apprentice
- Posts: 58
- Joined: Sun Apr 27, 2014 4:09 pm
- Model of CNC Machine: CNCRouterparts Benchtop Pro
Re: Frankenswitch instructions and files.
Like Highpockets, I've had these files since last year. Finally got them made.
Still thinking about painting the trestles and back plates to look like metal.
Thanks so much for sharing.
--Rich Farwell
Still thinking about painting the trestles and back plates to look like metal.
Thanks so much for sharing.
--Rich Farwell