hdu table insert
-
- Vectric Apprentice
- Posts: 52
- Joined: Thu Mar 18, 2010 4:05 am
- Model of CNC Machine: axyz 7012
- Location: Belgrade montana
hdu table insert
here's some pictures of an hdu relief carved and airbrushed table insert i am working on.
- dhellew2
- Vectric Wizard
- Posts: 1322
- Joined: Thu May 22, 2008 10:14 pm
- Model of CNC Machine: Legacy Artisan 72 and AVID CNC Rotary
- Location: Royal City Washington
Re: hdu table insert
Beautiful work!
Dale
Dale
You will get old if you live long enough!
Young = time, no money
Old = money, no time
Dale
Young = time, no money
Old = money, no time
Dale
-
- Vectric Apprentice
- Posts: 52
- Joined: Thu Mar 18, 2010 4:05 am
- Model of CNC Machine: axyz 7012
- Location: Belgrade montana
Re: hdu table insert
thanks Dale,
planning to wrap the edges with wood and have a nice piece of bevel glass for the top. legs i'm still thinking about.
planning to wrap the edges with wood and have a nice piece of bevel glass for the top. legs i'm still thinking about.
-
- Vectric Wizard
- Posts: 377
- Joined: Sat Dec 15, 2007 3:46 pm
- Model of CNC Machine: MechMate
- Location: Orlando, FL
Re: hdu table insert
Very nice work. Thank you for sharing
-
- Vectric Craftsman
- Posts: 260
- Joined: Tue Mar 11, 2014 6:12 pm
- Model of CNC Machine: salecnc XJ1224
- Location: Auckland New Zealand
Re: hdu table insert
How big is it, how long did it take to machine. How Cool is it!
regards
Brian
regards
Brian
-
- Vectric Apprentice
- Posts: 80
- Joined: Thu Oct 27, 2011 10:06 pm
- Model of CNC Machine: Joe's CastCNC Hybrid 4x4 R&P router
- Location: Maysville, GA
Re: hdu table insert
Great work. About year ago I started airbrushing some of my 3D work. My airbrushing is not up to outstanding work. Looking forward to other projects.
-
- Vectric Apprentice
- Posts: 52
- Joined: Thu Mar 18, 2010 4:05 am
- Model of CNC Machine: axyz 7012
- Location: Belgrade montana
Re: hdu table insert
it's 44 inches wide by 21 inches tall and 2 inches thick.
run time was 18 hours using a 1/4" ball nose for roughing and an 1/8" ballnose for finishing.
run time was 18 hours using a 1/4" ball nose for roughing and an 1/8" ballnose for finishing.
-
- Vectric Apprentice
- Posts: 52
- Joined: Thu Mar 18, 2010 4:05 am
- Model of CNC Machine: axyz 7012
- Location: Belgrade montana
Re: hdu table insert
here's some shots of a skull model i just completed also ( just modeled, haven't cut yet).
-
- Vectric Apprentice
- Posts: 52
- Joined: Thu Mar 18, 2010 4:05 am
- Model of CNC Machine: axyz 7012
- Location: Belgrade montana
Re: hdu table insert
here's some shots of a sea turtle model i just completed also ( just modeled, haven't cut yet).
i love working with vectric to bring my ideas to life, the work pays off when you cut your projects.
i love working with vectric to bring my ideas to life, the work pays off when you cut your projects.
-
- Vectric Craftsman
- Posts: 105
- Joined: Sun Jun 15, 2014 3:13 pm
- Model of CNC Machine: CNC Shark
Re: hdu table insert
Gazilla that is absolutely beautiful. Will make a great table.. I try painting like that and now im looking at youtubes for practice still bad but not as much lol.
Any pointers? keep up the great work.
Any pointers? keep up the great work.
-
- Vectric Apprentice
- Posts: 52
- Joined: Thu Mar 18, 2010 4:05 am
- Model of CNC Machine: axyz 7012
- Location: Belgrade montana
Re: hdu table insert
the best pointer i can think of for the painting is go gently. meaning thin soft layers, most signs are thick coats and flat painting. for something like this it takes layers to get it looking right.
best of luck and keep practicing, you'll only get better.
best of luck and keep practicing, you'll only get better.
-
- Vectric Apprentice
- Posts: 52
- Joined: Thu Mar 18, 2010 4:05 am
- Model of CNC Machine: axyz 7012
- Location: Belgrade montana
finally done
well thanks to the help of a friend (he built the woodwork) this has finally become a finished project.
- Leo
- Vectric Wizard
- Posts: 4082
- Joined: Sat Jul 14, 2007 3:02 am
- Model of CNC Machine: 1300 x 1300 x 254 Chinese Made
- Location: East Freetown, Ma.
- Contact:
Re: hdu table insert
That's fantastic Gill.
Imagine the Possibilities of a Creative mind, combined with the functionality of CNC