5- Quarter scale carved door samples that I made for a client. I just make the door panels for the door shop
https://www.dropbox.com/s/pfljv6s357mkv ... s.jpg?dl=0
Textured Door Panels
https://www.dropbox.com/s/0m7kvtked8dvt ... l.jpg?dl=0
Eagle Door Panel
https://www.dropbox.com/s/lnf06iz0z3x74 ... s.jpg?dl=0
Fluted Door Panel
https://www.dropbox.com/s/2lruku8ubevje ... s.jpg?dl=0
Moose Door Panel
https://www.dropbox.com/s/u8vvz12rw4c87 ... 1.jpg?dl=0
Full Carved Door Panel
Quarter Scale Door Samples
- Creation in Wood
- Vectric Wizard
- Posts: 863
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA
Quarter Scale Door Samples
Thank You
Doug
Doug
- ChrisInEstes
- Vectric Wizard
- Posts: 841
- Joined: Fri Jul 17, 2009 8:00 pm
- Model of CNC Machine: Vytek 4' X 8' - Perske Spindle - Mach3
- Location: Estes Park, Colorado, USA
Re: Quarter Scale Door Samples
Nice... I like them.
Chris
Chris
Aspire 9.5 - FlexiEXPERT 11 - Vytek Rebel 4' x 8' - 5HP Perske Spindle
- Creation in Wood
- Vectric Wizard
- Posts: 863
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA
- ChrisInEstes
- Vectric Wizard
- Posts: 841
- Joined: Fri Jul 17, 2009 8:00 pm
- Model of CNC Machine: Vytek 4' X 8' - Perske Spindle - Mach3
- Location: Estes Park, Colorado, USA
Re: Quarter Scale Door Samples
Nope... I didn't make it. I was working that Friday, and most of Saturday. Did you have a good turnout?
If you do it again, let me know as soon as you can, so I can plan ahead.
Chris
If you do it again, let me know as soon as you can, so I can plan ahead.
Chris
Aspire 9.5 - FlexiEXPERT 11 - Vytek Rebel 4' x 8' - 5HP Perske Spindle
- Creation in Wood
- Vectric Wizard
- Posts: 863
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA
Re: Quarter Scale Door Samples
Had 50- people show up from 9- states and one from Austral. A very good turn out.
Thank You
Doug
Doug
- ChrisInEstes
- Vectric Wizard
- Posts: 841
- Joined: Fri Jul 17, 2009 8:00 pm
- Model of CNC Machine: Vytek 4' X 8' - Perske Spindle - Mach3
- Location: Estes Park, Colorado, USA
Re: Quarter Scale Door Samples
Wow... That's awesome. I hope you do it again.Creation in Wood wrote:Had 50- people show up from 9- states and one from Austral. A very good turn out.
Chris
Aspire 9.5 - FlexiEXPERT 11 - Vytek Rebel 4' x 8' - 5HP Perske Spindle
-
- Vectric Craftsman
- Posts: 123
- Joined: Thu Nov 01, 2012 2:05 am
- Model of CNC Machine: Camaster Panther 4x8
Re: Quarter Scale Door Samples
What wood did you use for the samples? They look good.
- Creation in Wood
- Vectric Wizard
- Posts: 863
- Joined: Thu May 28, 2015 8:58 pm
- Model of CNC Machine: Legacy Maverick ATC 4x8 CNC
- Location: Monument, Colorado USA