Free Project - Home Cheer Plaque
-
- Vectric Apprentice
- Posts: 71
- Joined: Tue Jun 10, 2014 10:42 am
- Model of CNC Machine: ShopBot
Free Project - Home Cheer Plaque
This cheerful and encouraging wall decor item is a nice addition for your own home or as a gift for friends and loved ones. The project features five v-carved word plaques with a background texture created by the VCarve Pro software and machined with a small ballnose bit. The project can easily be customized as a Christmas themed item (i.e., paint or stain with holiday colors), if desired. It can be assembled using 10 wood screws to enable disassembly for storage, or glued together as a permanent structure, as you wish.
Click the link to download the project: http://www.vectric.com/cool-stuff/proje ... laque.html
The finished dimensions of this project are approximately 12 " W x 22 " T x 1.125 " D
This project is available for both VCarve 8.0 & Aspire 8.0 users and above.
If you go ahead and create this project, then it would be great to see a photo of your finished piece here on the Vectric Forum. Alternatively feel free to email us a picture of your finished piece at online@vectric.com.
Graphic & Web Designer
www.vectric.com
www.vectric.com
-
- Vectric Craftsman
- Posts: 118
- Joined: Sun Jun 08, 2014 3:13 am
- Model of CNC Machine: Probotix Meteor, Aspire 8.014
- Location: Red Deer, AB
Re: Free Project - Home Cheer Plaque
Gave this a try, for my Daughter for Christmas.
It's Walnut finished with a Satin Lacquer finish.
I was pleased. Had to modify it a bit to fit my wood size as I wanted it all out of the same piece and not glued up.
(sorry about the sidways picture...)
It's Walnut finished with a Satin Lacquer finish.
I was pleased. Had to modify it a bit to fit my wood size as I wanted it all out of the same piece and not glued up.
(sorry about the sidways picture...)
- Ms Wolffie
- Vectric Wizard
- Posts: 2695
- Joined: Sat Mar 31, 2012 10:41 pm
- Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
- Location: Tully Heads, Wet Tropics, Queensland, Australia
Re: Free Project - Home Cheer Plaque
Don't worry Keith, it corrects itself in the preview.
Good job.
I think I have just the right piece for it
Good job.
I think I have just the right piece for it
Cheers
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
- mtylerfl
- Vectric Archimage
- Posts: 5889
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Free Project - Home Cheer Plaque
Keith,
That is a very nice upgrade to the project! Beautiful work!
That is a very nice upgrade to the project! Beautiful work!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC