YouTube Videos - Show us what you are cutting

An area to upload images of pieces cut using VCarve Pro
User avatar
swaggs21
Vectric Craftsman
Posts: 100
Joined: Wed Aug 27, 2008 2:43 pm
Location: Rock Lake, WV

Re: YouTube Videos - Show us what you are cutting

Post by swaggs21 »

Here is a new one, first real project on the behemoth. To bad is was 7"x 5.5" :o

-Chris

The new woodworking site:
http://www.33degreeseastww.com

krtwood
Posts: 46
Joined: Wed Dec 16, 2009 9:38 pm

Re: YouTube Videos - Show us what you are cutting

Post by krtwood »

http://www.youtube.com/watch?v=RCGucPF3Ho8

A little video of my attempt at turning a fractal into something that looks like a chip carving. Lots and lots of hours in vcarve resizing and moving groups of vectors around. Machined in mahogany which seems to hold up to those pockets right next to each other across the grain pretty well.

pben
Posts: 5
Joined: Sat Nov 13, 2010 7:24 pm
Model of CNC Machine: Victor 900VF
Location: Sölvesborg, SWEDEN

Re: YouTube Videos - Show us what you are cutting

Post by pben »

Here's a clip from my workshop:

I'm routing the outlines and soundhole of a concert guitar soundboard. The workpiece is held with vacuum and the white vacuum board is made out of high pressure laminate (similar to Formica, only 1/2" thick). It works like a dream...

Regards
Peter

JohnJackson
Posts: 33
Joined: Mon Aug 09, 2010 1:31 am
Model of CNC Machine: Magnum Phoenix, New Hermes 1219
Location: Russell, Ontario
Contact:

Re: YouTube Videos - Show us what you are cutting

Post by JohnJackson »

Here is a video of VCarving a corporate logo into a mahogany door panel. Cross posted from another message.



Thanks,

John Jackson
Russell ON

User avatar
bgriggs
Vectric Wizard
Posts: 306
Joined: Sat Aug 20, 2005 2:29 pm
Model of CNC Machine: Warp Drive Project R&P
Location: Canastota NY
Contact:

Re: YouTube Videos - Show us what you are cutting

Post by bgriggs »

Hee is a video of cutting a Boy Scout Emblem that I designed in Aspire.



Bill
Aspire, Cut3D, WarpDrive R&P, Lathe/Mill, Laser, foam cutter makermasters.com @BillGriggs

User avatar
bgriggs
Vectric Wizard
Posts: 306
Joined: Sat Aug 20, 2005 2:29 pm
Model of CNC Machine: Warp Drive Project R&P
Location: Canastota NY
Contact:

Re: YouTube Videos - Show us what you are cutting

Post by bgriggs »

Here is a video of the Radiator shoe base plate, dust collection shoe. I used Radiator brushes for the bristles and hinges to make bit changes easy. If folks are interested I can post the file somewhere else on the forum.



Bill
Aspire, Cut3D, WarpDrive R&P, Lathe/Mill, Laser, foam cutter makermasters.com @BillGriggs

User avatar
bgriggs
Vectric Wizard
Posts: 306
Joined: Sat Aug 20, 2005 2:29 pm
Model of CNC Machine: Warp Drive Project R&P
Location: Canastota NY
Contact:

Re: YouTube Videos - Show us what you are cutting

Post by bgriggs »

Here is the first test I did with the Radiator Shoe dust collection boot. I sprinkled some saw dust around the table and checked what it picked up.




Bill
Aspire, Cut3D, WarpDrive R&P, Lathe/Mill, Laser, foam cutter makermasters.com @BillGriggs

Robert58
Posts: 33
Joined: Tue Dec 01, 2009 9:23 pm
Model of CNC Machine: Camaster
Location: Utah

Re: YouTube Videos - Show us what you are cutting

Post by Robert58 »

Here are some videos I made, using my Camaster.








Most are 2-D work using Aspire.

Dan.H.
Vectric Craftsman
Posts: 103
Joined: Sat Aug 13, 2005 6:54 am
Model of CNC Machine: 1325 Intech and 6090 Intech
Location: Northern B.C. Canada
Contact:

Re: YouTube Videos - Show us what you are cutting

Post by Dan.H. »

My home made Machine.


User avatar
Mogal
Vectric Craftsman
Posts: 238
Joined: Wed Oct 13, 2010 5:28 pm
Model of CNC Machine: DIY CNC
Location: Victoria, BC
Contact:

Re: YouTube Videos - Show us what you are cutting

Post by Mogal »

Gotta love the home build machines!
You got a few more horse power then I have on mine :cry:

Here is a 'Live, Love, Laugh' I made for my daughter

I decided to time lapse it with the ipod.
(for whatever reason, the ipod mirrored the image!!!!)



And here is the virtual cutout of my 'Specialty Bolts' :D
Attachments
live.jpg

Dan.H.
Vectric Craftsman
Posts: 103
Joined: Sat Aug 13, 2005 6:54 am
Model of CNC Machine: 1325 Intech and 6090 Intech
Location: Northern B.C. Canada
Contact:

Re: YouTube Videos - Show us what you are cutting

Post by Dan.H. »

That is so neat...now you have to make the tools to use them...hehe...

User avatar
backyard_cnc
Vectric Craftsman
Posts: 237
Joined: Mon Aug 31, 2009 4:41 am
Model of CNC Machine: SHOPBOT, LIGHTMACHINES MILL, AJAXCNC-KNE
Location: winnipeg, manitoba, Canada

Re: YouTube Videos - Show us what you are cutting

Post by backyard_cnc »

heres a video I did some time back. Keep meaning to do more but nver seem to get to it!

enjoy

gerald


User avatar
TReischl
Vectric Wizard
Posts: 4584
Joined: Thu Jan 18, 2007 6:04 pm
Model of CNC Machine: 8020 48X36X7 RP 2022 UCCNC Screenset
Location: Leland NC

Re: YouTube Videos - Show us what you are cutting

Post by TReischl »

Making a small Bombe' box

https://www.youtube.com/watch?v=GNtroI2zF0o

you can also see more videos on my site.
"If you see a good fight, get in it." Dr. Vernon Johns

scancad
Posts: 18
Joined: Tue Aug 31, 2010 7:41 am
Model of CNC Machine: Pro Carv
Location: UK
Contact:

Re: YouTube Videos - Show us what you are cutting

Post by scancad »

Just to show what we do with our Pro Carv CNC


Erniewood
Posts: 2
Joined: Mon Aug 22, 2011 11:27 am
Model of CNC Machine: SHARK PRO PLUS
Location: Warragul,Victoria,Australia

Re: YouTube Videos - Show us what you are cutting

Post by Erniewood »

Wooden Gear Clocks
Here is a link to my you tube video of a wooden gear clock cut with VCarve Pro

You can also check out a few more of my clocks.
No cnc footage but if anyone is interested I could upload some to youtube

Post Reply