pedestal for bronze I just completed
-
- Vectric Wizard
- Posts: 823
- Joined: Tue Jun 01, 2010 4:51 pm
- Model of CNC Machine: CAMaster MC4848
- Location: Prescott AZ
pedestal for bronze I just completed
I just finished making a pedestal for a bronze artist that I have work for a long time. The last picture is a pedestal that I did for him a long time ago and the side plaques were done by a guy with a laser machine. He wanted a new pedestal that would open for storage inside for a client. I carved the doors, side plaques and back plaque for the project using Vectric models from the "Design and Carve western series" instead of using the laser cut plaques. It was a fun project and I thought it turned out well. He picked it up Monday and will install the bronze and deliver it, he was very happy.
Thanks for looking.
Mark
Thanks for looking.
Mark
-
- Vectric Wizard
- Posts: 823
- Joined: Tue Jun 01, 2010 4:51 pm
- Model of CNC Machine: CAMaster MC4848
- Location: Prescott AZ
Re: pedestal for bronze I just completed
I could only post 6 pictures so the last two are here.
Mark
Mark
-
- Vectric Wizard
- Posts: 772
- Joined: Sat Jan 09, 2010 7:28 am
- Model of CNC Machine: cnc mako shark ext bed with HD 5 gantry
- Location: Buffalo,NY
Re: pedestal for bronze I just completed
We'll done, excellent workmanship. I'm sure he liked it.
Tony
Tony
What will matter is not what you bought but what you built; not what you got, but what you gave
- zeeway
- Vectric Wizard
- Posts: 3157
- Joined: Thu Feb 11, 2010 9:24 pm
- Model of CNC Machine: Self-built
- Location: SC, USA
Re: pedestal for bronze I just completed
Beautiful craftsmanship and design.
Angie
Angie
- TReischl
- Vectric Wizard
- Posts: 4652
- Joined: Thu Jan 18, 2007 6:04 pm
- Model of CNC Machine: 8020 48X36X7 RP 2022 UCCNC Screenset
- Location: Leland NC
Re: pedestal for bronze I just completed
Excellent work.
"If you see a good fight, get in it." Dr. Vernon Johns
-
- Vectric Wizard
- Posts: 823
- Joined: Tue Jun 01, 2010 4:51 pm
- Model of CNC Machine: CAMaster MC4848
- Location: Prescott AZ
Re: pedestal for bronze I just completed
Thanks Guys.... once in a while you find a job that's perfect for Aspire and 3D work. You got to love this program.
Mark
Mark
- esteeme1
- Vectric Wizard
- Posts: 2132
- Joined: Tue Nov 02, 2010 3:26 pm
- Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
- Location: Chesapeake VA
- Contact:
Re: pedestal for bronze I just completed
That is freeken awesome, I love it and have always wanted a bronze. What a great display piece.
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
- gordread
- Vectric Wizard
- Posts: 382
- Joined: Sun Jul 08, 2012 3:29 am
- Model of CNC Machine: CNC Professor HDX
- Location: Onoway, Alberta
- Contact:
Re: pedestal for bronze I just completed
Great work. Thank you for the pictures.
Gordon
Gordon
- dansfoundry
- Vectric Craftsman
- Posts: 157
- Joined: Tue Sep 01, 2009 3:11 am
- Location: New Mexico
- Contact:
Re: pedestal for bronze I just completed
If I might ask who is the sculptor? Looks like somebody I used to cast for. Thanks Dan
-
- Vectric Wizard
- Posts: 823
- Joined: Tue Jun 01, 2010 4:51 pm
- Model of CNC Machine: CAMaster MC4848
- Location: Prescott AZ
Re: pedestal for bronze I just completed
The bronze artist is Bradford Williams and I believe he gets his castings from Montana. He is truly a great artist. He has been doing it for a long time and has won numerous awards. The particular bronze that this pedestal is for sells for $23,000. I don't know how many of that particular bronze he has sold but I've been his woodworker guy for 6 or 7 years.
Thanks again for all the compliments especially from some of the best I've seen on this forum.
Mark
Thanks again for all the compliments especially from some of the best I've seen on this forum.
Mark
-
- Vectric Craftsman
- Posts: 233
- Joined: Mon Dec 31, 2012 7:35 pm
- Model of CNC Machine: Shark Pro Plus HD & Custom built 4x4
- Location: Ohio
Re: pedestal for bronze I just completed
Beautiful!