Dresser Box
-
- Vectric Wizard
- Posts: 1129
- Joined: Thu Jul 18, 2013 4:58 pm
- Model of CNC Machine: homebuild / VCP 8.0
Re: Dresser Box
Andy,
Thanks,
VCP, my first attempt at any 3d, using the free Vector Art 3d machinist.
Just set the model height I wanted and created a profile around the part to fit pocket in top
Thanks,
VCP, my first attempt at any 3d, using the free Vector Art 3d machinist.
Just set the model height I wanted and created a profile around the part to fit pocket in top
-
- Vectric Wizard
- Posts: 1129
- Joined: Thu Jul 18, 2013 4:58 pm
- Model of CNC Machine: homebuild / VCP 8.0
Re: Dresser Box
Andy,
Just realized I didn't say, its a Vector Art 3d model (the deer and trees) a panel scene.
Vector Art like Vectric, do the hard part....
Just realized I didn't say, its a Vector Art 3d model (the deer and trees) a panel scene.
Vector Art like Vectric, do the hard part....
Re: Dresser Box
That's a great box. I download the hinge and plan to use it on some of the boxes I'm making. Love the design of the box and was wondering if you had the plans for the box (not the engraving but the box only). could use it.
Thanks Much Skip.
Thanks Much Skip.
-
- Vectric Wizard
- Posts: 1129
- Joined: Thu Jul 18, 2013 4:58 pm
- Model of CNC Machine: homebuild / VCP 8.0
Re: Dresser Box
Skip,
These 2 vectors are all I used, but I epoxy laminated the maple and walnut to a thickness of 2.250
Used a 3/4 x 2 straight bit to pocket and a 1/2 x 2 1/2 for the profile
Used 1/2" thick material for top
Depending on your machine you may have to adjust
These 2 vectors are all I used, but I epoxy laminated the maple and walnut to a thickness of 2.250
Used a 3/4 x 2 straight bit to pocket and a 1/2 x 2 1/2 for the profile
Used 1/2" thick material for top
Depending on your machine you may have to adjust
- Attachments
-
- New.crv Dresser box (SPalm).crv
- (15.5 KiB) Downloaded 563 times
Re: Dresser Box
Thanks. I'll let you know how I do.
Skip
Skip
- scottp55
- Vectric Wizard
- Posts: 4717
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: Dresser Box
Thanks Glenn,
Missed this one somehow until Ilwood linked it
scott
Missed this one somehow until Ilwood linked it
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
-
- Vectric Wizard
- Posts: 1479
- Joined: Sun Nov 28, 2010 5:10 pm
- Model of CNC Machine: Home built designs - 3'x4' and 5'x12'
- Location: Eastern NC, USA
Re: Dresser Box
I was playing with your file yesterday and scaled it up to 12" width, then rounded the border and added a wicker weave to the lid. I'll probably add a centerpiece with a name once I figure out who it will be made for.
The box shape sort of resembles a straw fly fishing tackle box that I have seen in the distant past, so I added the wicker. Thanks for the vectors. Though this is an Aspire modification for the top panel, you can do a lot with it using wildlife or other line drawing vector art designs and Vcarve toolpaths.
CarveOne
The box shape sort of resembles a straw fly fishing tackle box that I have seen in the distant past, so I added the wicker. Thanks for the vectors. Though this is an Aspire modification for the top panel, you can do a lot with it using wildlife or other line drawing vector art designs and Vcarve toolpaths.
CarveOne
CarveOne
http://www.carveonecncwoodcraft.com
http://www.carveonecncwoodcraft.com
-
- Vectric Craftsman
- Posts: 229
- Joined: Sat Apr 30, 2011 2:30 pm
- Model of CNC Machine: DIY 4' x 8' CNC Router/Plasma
- Location: Shingletown, Ca. 96088
Re: Dresser Box
Wow! really Nice!
Love the hinge!
Love the hinge!
- llwood
- Vectric Wizard
- Posts: 392
- Joined: Sun Nov 18, 2012 5:07 pm
- Model of CNC Machine: Legacy Maverick
- Location: Dillsburg, PA
- Contact:
Re: Dresser Box
Great design, and, once again, great hinge!
Thanks,
Andy and Marty
-
- Vectric Wizard
- Posts: 1129
- Joined: Thu Jul 18, 2013 4:58 pm
- Model of CNC Machine: homebuild / VCP 8.0
Re: Dresser Box
Andy and Marty,
They look great. The profile of the box was actually from Spalm, I made one of the jewelry boxes he designed and liked the shape.
They look great. The profile of the box was actually from Spalm, I made one of the jewelry boxes he designed and liked the shape.
- llwood
- Vectric Wizard
- Posts: 392
- Joined: Sun Nov 18, 2012 5:07 pm
- Model of CNC Machine: Legacy Maverick
- Location: Dillsburg, PA
- Contact:
Re: Dresser Box
Thanks for letting us know. We want to give credit where credit is due, so thanks to Steve Palm as well!
--Andy
--Andy
Re: Dresser Box
Great looking box. Like others who posted I'm intrigued with your hinge.
Thanks for posting it
Thanks for posting it