These are my pictures in wood
Re: These are my pictures in wood
Hi all,
I have not looked at the forum for a couple of days and just did
Wow, a lot of interest in this.......and thanks again for the positive comments.
I'm on a holiday trip to Greece and i will be back in a little more than a week.......i will read all the posts when i get back, Take care
Regards,
/Markus
I have not looked at the forum for a couple of days and just did
Wow, a lot of interest in this.......and thanks again for the positive comments.
I'm on a holiday trip to Greece and i will be back in a little more than a week.......i will read all the posts when i get back, Take care
Regards,
/Markus
-
- Posts: 14
- Joined: Tue Jun 05, 2012 1:58 am
- Model of CNC Machine: cncshark
Re: These are my pictures in wood
What type of wood do you use?
Re: These are my pictures in wood
Best Photocarve work I've seen in wood to date. Nice job! I'm also curious to know what would you use. What are your average run times with those bits? I plugged in some config info based on your screen shot and it was saying around 30 hours to cut the picture I uploaded which wasn't even complex. That seemed way too long. This was for a 5" x 8" cut.
Thanks for any info.
Thanks for any info.
Re: These are my pictures in wood
Hello Markus,
I have been looking at your you tube vids and these look really fantastic!
So can you give us a clue on your finishing technique yet or is it a secret?
I have been trying to cut my wedding photo in maple. I can get the cut quality to look about par with yours but i keep stuffing it up on the finishing part
I have been looking at your you tube vids and these look really fantastic!
So can you give us a clue on your finishing technique yet or is it a secret?
I have been trying to cut my wedding photo in maple. I can get the cut quality to look about par with yours but i keep stuffing it up on the finishing part
- bill_w
- Vectric Wizard
- Posts: 435
- Joined: Wed Sep 08, 2010 12:19 pm
- Model of CNC Machine: PRSalpha BT48
- Location: Milwaukee,WI
Re: These are my pictures in wood
Very nice,excellent work.
Computers-Yuk....I should junk it...It never does what it should do...only what I tell it.
- Ms Wolffie
- Vectric Wizard
- Posts: 2695
- Joined: Sat Mar 31, 2012 10:41 pm
- Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
- Location: Tully Heads, Wet Tropics, Queensland, Australia
Re: These are my pictures in wood
Looks like Markus forgot to return from Greece.
Must have been a fantastic holiday
Reminds me of when we went on a 3 month holiday to Queensland in March 99 and forgot to go home again
Cheers
Wolffie
Must have been a fantastic holiday
Reminds me of when we went on a 3 month holiday to Queensland in March 99 and forgot to go home again
Cheers
Wolffie
Cheers
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Re: These are my pictures in wood
I just returned from Greece...i met a really nice girl and cancelled my flight back
No not really...it's been a long time since i made a wood picture but i just did one the other day. I have moved to an new house and i have not done anything with the cnc-machine until now.
I made a picture of my daughter and her cousin...i think it came out nice.
http://www.youtube.com/watch?v=YqrEvPAr9aA
Take care...
/Markus
No not really...it's been a long time since i made a wood picture but i just did one the other day. I have moved to an new house and i have not done anything with the cnc-machine until now.
I made a picture of my daughter and her cousin...i think it came out nice.
http://www.youtube.com/watch?v=YqrEvPAr9aA
Take care...
/Markus
- Ms Wolffie
- Vectric Wizard
- Posts: 2695
- Joined: Sat Mar 31, 2012 10:41 pm
- Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
- Location: Tully Heads, Wet Tropics, Queensland, Australia
Re: These are my pictures in wood
Certainly did
Where in Sweden are you?
I used to live in Karlskoga.
Cheers
Wolffie
Where in Sweden are you?
I used to live in Karlskoga.
Cheers
Wolffie
Cheers
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Re: These are my pictures in wood
Thanks...
I live just north of Enköping...How did you find Karlskoga of all the places in the world
/Markus
I live just north of Enköping...How did you find Karlskoga of all the places in the world
/Markus
- Ms Wolffie
- Vectric Wizard
- Posts: 2695
- Joined: Sat Mar 31, 2012 10:41 pm
- Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
- Location: Tully Heads, Wet Tropics, Queensland, Australia
Re: These are my pictures in wood
Came from Copenhagen, no work there in 1958 so ended up working at BoforsWoodArt wrote:Thanks...
I live just north of Enköping...How did you find Karlskoga of all the places in the world
/Markus
Lived in a little woodcutter's hut in the middle of the forest.
Cheers
Wolffie
Cheers
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
- JJWMACHINECO
- Vectric Craftsman
- Posts: 143
- Joined: Tue Aug 04, 2009 2:15 pm
- Model of CNC Machine: Re-worked/Modified K2CNC KG-3925
- Location: Deep South
Re: These are my pictures in wood
Very nice work Markus!
Glad to see your back up and engraving those fine works of art again.
Jeff
Glad to see your back up and engraving those fine works of art again.
Jeff
Extensivly Re-worked/Re-designed/Modified Servo K2CNC KG-3925 and the Mini Laser Engraver
Re: These are my pictures in wood
-> wolffie Woodcutter's hut in the middle of the forrest......sounds like a really nice place to live...music to my ears anyway
-Z JJWMACHINECO Thank you. Yeah, nice to be "back on the track"
Here is one i did for a friend yesterday...
/Markus
-Z JJWMACHINECO Thank you. Yeah, nice to be "back on the track"
Here is one i did for a friend yesterday...
/Markus
- Ms Wolffie
- Vectric Wizard
- Posts: 2695
- Joined: Sat Mar 31, 2012 10:41 pm
- Model of CNC Machine: Blue Elephant 1325, Shark HD Pro
- Location: Tully Heads, Wet Tropics, Queensland, Australia
Re: These are my pictures in wood
Yes, no power, no water just a beautiful litttle clean stream.
It was a lovely time, best summer of my life.
Got too difficult to get out there when winter came, though
Cheers
Wolffie
It was a lovely time, best summer of my life.
Got too difficult to get out there when winter came, though
Cheers
Wolffie
Cheers
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Wolffie
Whatshammacallit
Cut3D, VCarvePro 6.5, Aspire4, PhotoVCarve, Corel Graphics Suite X6
Re: These are my pictures in wood
You've definitely mastered the process.
I did see in one of your videos that you're running 3600mm/min (141ipm) but what are your other settings, bits you use? Any finishing tips you can share would be GREATLY appreciated by many of us.
Also, great idea for the DIY vacuum table. Sometimes things don't have to be complicated to work.
Any help for us new guys? (Or seasoned guys that would mind some pointers).
I did see in one of your videos that you're running 3600mm/min (141ipm) but what are your other settings, bits you use? Any finishing tips you can share would be GREATLY appreciated by many of us.
Also, great idea for the DIY vacuum table. Sometimes things don't have to be complicated to work.
Any help for us new guys? (Or seasoned guys that would mind some pointers).