For those of you who do not frequent the ShopBot forum I thought I would also post this here. We added a Dentistry Symbol to the site yesterday. Below is an image of this shown at 10 inches high, 0.375 inches deep (0.5 material) cut with a 1/8 ballnose 10% stepover (just for reference).
I have also attached a zip file with vector outlines of the file that include the Dentistry text to you can line this up with your 3D model and v-carve it into the part.
The model is available from the site for $25 - here:
http://www.vectorart3d.com/store/index. ... l&ID=57225
There seemed to be a lot of interest in this, I guess so people can make one for their dentist perhaps so they are more gentle to them
Cheers,
James
Make friends with your Dentist
Moderator: Todd Bailey
- JamesB
- Vectric Alumni
- Posts: 1257
- Joined: Tue May 30, 2006 1:24 pm
- Model of CNC Machine: Exel CNC SL60/90 Pro
- Location: Warwickshire, UK
Make friends with your Dentist
- Attachments
-
- Dentistry_Vectors.zip
- (59.71 KiB) Downloaded 310 times
-
- Vectric Wizard
- Posts: 2596
- Joined: Fri Dec 21, 2007 1:57 am
- Model of CNC Machine: CAMaster 508 ATC
- Location: columbia sc
- Contact:
Re: Make friends with your Dentist
i was bidding a dentist office for the medical casework and front desk,, client has been picky and the competition was fierce!! i purchased this file made a jpeg of the file with the dentist name on it and told the client i would throw in the sign for an awarded job.
signed contract in less than three hour later!!
thanks james
signed contract in less than three hour later!!
thanks james