Hi James,
Trying to do a test with one of your FREE .v3m files (Fleur De Lys B)
After saving the toolpaths file in 3D Machinist with material size set to 150 sq. I have imported it into VCarve Pro, with material size set to 200 sq.
I expected the .v3m image to be smaller than the material size set in VCP. As you can see from the attached .jpg something is not correct.
Have I missed something here? Any help would be appreciated.
Regards,
Warren.
Problem with Scale
Moderator: Todd Bailey
-
- Vectric Craftsman
- Posts: 181
- Joined: Wed Nov 30, 2005 3:08 pm
- Model of CNC Machine: Router
- Location: Bordeaux, France
Problem with Scale
- Attachments
-
- 3d test1.jpg
- (150.24 KiB) Downloaded 295 times
- JamesB
- Vectric Alumni
- Posts: 1257
- Joined: Tue May 30, 2006 1:24 pm
- Model of CNC Machine: Exel CNC SL60/90 Pro
- Location: Warwickshire, UK
As Tony says it is probably a different file (with a similar name). Make sure to give it a unique name you recognise when you save it so you can be sure to load the right one into VCP (i manage to do this often!). If this does not do the trick then please email me the V3M model with the toolpaths to take a look at - jab(at)carve3d(dot)com - thanks, James