MIA POW V3M file

Tips, tricks and questions about the free Vector Art 3D Machinist from www.vectorart3d.com or Design & Make projects

Moderator: JamesB

Re: MIA POW V3M file

Postby NormanAlbert » Sun Apr 12, 2009 1:32 pm

This is in referance to the post by Metalworkz, the POW_MIA 2.crv file. I've tried to download this file but Cut2D won't open it. A notice comes up stating- Unable to open file created is version 4.602
What can I do to open this file, I have some people I would like to give this plaque to. Norm
NormanAlbert
Vectric Wizard
 
Posts: 350
Joined: Wed Apr 01, 2009 12:15 am
Location: Dunnellon, Florida

Re: MIA POW V3M file

Postby metalworkz » Sun Apr 12, 2009 2:15 pm

NormanAlbert wrote:This is in referance to the post by Metalworkz, the POW_MIA 2.crv file. I've tried to download this file but Cut2D won't open it. A notice comes up stating- Unable to open file created is version 4.602
What can I do to open this file, I have some people I would like to give this plaque to. Norm


Hello Norm,

Have you tried to download and open any of the 3 files I posted after seeing your earlier reply to this post? I will post them here to make sure you will find them. I did these files especially for anyone that may want to cut this with Cut2D. One file even has vectors traced for the round feature in the center so it can be cut with 2D even if you can't use the 3D file. I have tested all of them and they will D/L and load into Cut2D. I hope this finally gets you the file you need.
Attachments
POW_MIA5Vcarve.eps
(51.65 KiB) Downloaded 354 times
POW_MIA2_Cut2D.crv
(42 KiB) Downloaded 383 times
POW_MIA2.eps
(20.52 KiB) Downloaded 322 times
Best regards,
Wes
wes.spence@comcast.net
Gingery Machines:
Lathe, Horiz. Mill, Shaper, Leaf Brake
User avatar
metalworkz
Vectric Wizard
 
Posts: 2446
Joined: Mon Mar 31, 2008 3:26 am
Location: Modesto, California 95358 USA
Model of CNC Machine: SX3 CNC, DIY 24x20 & 48x60 routers

Re: MIA POW V3M file

Postby NormanAlbert » Sun Apr 12, 2009 7:52 pm

Thanks Wes: Played a bit with the programs, I think with part of yours and James program this will be a very nice peice of work. Need to tweek things a bit more. Thanks again. Norm
NormanAlbert
Vectric Wizard
 
Posts: 350
Joined: Wed Apr 01, 2009 12:15 am
Location: Dunnellon, Florida

Re: MIA POW V3M file

Postby gravirozo » Mon Jul 13, 2009 6:40 pm

hello all

i retouched a little this project... the letters were to close and i stretched a little them, also the wreath was not the best for 3d model...
i had to wrestling with adobe standards :-(.... their ps file contain some visualbasic like settings, also on the first line in the file they have some settings,,,, this is the main reason some of these not available to import in aspire,,,
the solution try to rename simple way *.ps to *.eps... in most case it will help... the other settings are difficult so if you feel adventorous try it...

i made a complex 3d model of james plaque and i try to put in smaller form... somehow to upload to here...

thanks
viktor
Attachments
powmia retouched.jpg
gravirozo
Vectric Wizard
 
Posts: 1980
Joined: Sat Jan 10, 2009 12:38 am

Re: MIA POW V3M file

Postby metalworkz » Mon Jul 13, 2009 7:01 pm

Hello Viktor,

It looks great!
Best regards,
Wes
wes.spence@comcast.net
Gingery Machines:
Lathe, Horiz. Mill, Shaper, Leaf Brake
User avatar
metalworkz
Vectric Wizard
 
Posts: 2446
Joined: Mon Mar 31, 2008 3:26 am
Location: Modesto, California 95358 USA
Model of CNC Machine: SX3 CNC, DIY 24x20 & 48x60 routers

Re: MIA POW V3M file

Postby gravirozo » Tue Jul 14, 2009 3:22 pm

the finished project..
Attachments
powmia.JPG
gravirozo
Vectric Wizard
 
Posts: 1980
Joined: Sat Jan 10, 2009 12:38 am

Re: MIA POW V3M file

Postby gravirozo » Sun Jul 19, 2009 9:22 pm

hello all

the file was too large, and i asked james boot to reduce it...
now it is in size as you all can download...

thanks
viktor
Attachments
POW-MIA.zip
(1004.42 KiB) Downloaded 540 times
gravirozo
Vectric Wizard
 
Posts: 1980
Joined: Sat Jan 10, 2009 12:38 am

Re: MIA POW V3M file

Postby BSImages » Thu Jan 14, 2010 6:23 am

GREAT JOB!
What were your settings?
What bit(s) did you use?
Thanks for posting,
Bill
User avatar
BSImages
Vectric Wizard
 
Posts: 336
Joined: Fri Jan 20, 2006 7:36 am
Location: Pine Grove, California
Model of CNC Machine: Home designed and built.

Re: MIA POW V3M file

Postby gravirozo » Mon Jan 18, 2010 4:46 am

hello bill

sorry i did not answer earlier...

1x12 maple, 1/16 ballendmill...


viktor
gravirozo
Vectric Wizard
 
Posts: 1980
Joined: Sat Jan 10, 2009 12:38 am

Re: MIA POW V3M file

Postby RoutnAbout » Sun Oct 24, 2010 6:02 am

Here's my latest version. If all goes well, I plan to cut this with in a couple of days.
Thanks for providing this JamesB
Attachments
pow-mia.jpg
pow-mia_iso.jpg
Roll of Honor <-- Never Forget
________
Don
User avatar
RoutnAbout
Vectric Wizard
 
Posts: 2075
Joined: Mon Sep 19, 2005 11:09 pm
Location: North Manchester, Indiana
Model of CNC Machine: Old Bot with a Rope Pull Start Spindle

Re: MIA POW V3M file

Postby davespenden » Sun Oct 24, 2010 2:56 pm

Don,
That is awesome looking! Nice work. Look forward to seeing it done.

Dave
davespenden
 
Posts: 32
Joined: Sat Mar 27, 2010 5:44 am

Re: MIA POW V3M file

Postby Tmswoodshop » Sat Nov 30, 2013 3:44 pm

WOW Don. That is by all means the best I have ever seen. thank you for posting it.
Tmswoodshop
 
Posts: 40
Joined: Thu Sep 17, 2009 11:47 pm
Location: GRAND RAPIDS, MI
Model of CNC Machine: CNC Shark Pro

Re: MIA POW V3M file

Postby tatinc2000 » Fri Jun 03, 2016 3:39 am

I know this is an old topic but I used the file tonight for a cribbage board. Thank you to the original person that posted this.
Attachments
POW Cribbage.jpg
tatinc2000
Vectric Apprentice
 
Posts: 118
Joined: Sat Jan 05, 2013 8:16 pm
Location: Central Minnesota
Model of CNC Machine: Homegrown

Previous

Return to Vector Art 3D / Design & Make - General

Who is online

Users browsing this forum: No registered users and 2 guests