MIA POW V3M file
Moderator: Todd Bailey
-
- Vectric Wizard
- Posts: 414
- Joined: Wed Apr 01, 2009 12:15 am
- Location: Dunnellon, Florida
Re: MIA POW V3M file
This is in referance to the post by Metalworkz, the POW_MIA 2.crv file. I've tried to download this file but Cut2D won't open it. A notice comes up stating- Unable to open file created is version 4.602
What can I do to open this file, I have some people I would like to give this plaque to. Norm
What can I do to open this file, I have some people I would like to give this plaque to. Norm
- metalworkz
- Vectric Wizard
- Posts: 2463
- Joined: Mon Mar 31, 2008 3:26 am
- Model of CNC Machine: SX3 CNC, DIY 24x20 & 48x60 routers
- Location: Modesto, California 95358 USA
Re: MIA POW V3M file
Hello Norm,NormanAlbert wrote:This is in referance to the post by Metalworkz, the POW_MIA 2.crv file. I've tried to download this file but Cut2D won't open it. A notice comes up stating- Unable to open file created is version 4.602
What can I do to open this file, I have some people I would like to give this plaque to. Norm
Have you tried to download and open any of the 3 files I posted after seeing your earlier reply to this post? I will post them here to make sure you will find them. I did these files especially for anyone that may want to cut this with Cut2D. One file even has vectors traced for the round feature in the center so it can be cut with 2D even if you can't use the 3D file. I have tested all of them and they will D/L and load into Cut2D. I hope this finally gets you the file you need.
- Attachments
-
- POW_MIA5Vcarve.eps
- (51.65 KiB) Downloaded 598 times
-
- POW_MIA2_Cut2D.crv
- (42 KiB) Downloaded 576 times
-
- POW_MIA2.eps
- (20.52 KiB) Downloaded 559 times
-
- Vectric Wizard
- Posts: 414
- Joined: Wed Apr 01, 2009 12:15 am
- Location: Dunnellon, Florida
Re: MIA POW V3M file
Thanks Wes: Played a bit with the programs, I think with part of yours and James program this will be a very nice peice of work. Need to tweek things a bit more. Thanks again. Norm
Re: MIA POW V3M file
hello all
i retouched a little this project... the letters were to close and i stretched a little them, also the wreath was not the best for 3d model...
i had to wrestling with adobe standards .... their ps file contain some visualbasic like settings, also on the first line in the file they have some settings,,,, this is the main reason some of these not available to import in aspire,,,
the solution try to rename simple way *.ps to *.eps... in most case it will help... the other settings are difficult so if you feel adventorous try it...
i made a complex 3d model of james plaque and i try to put in smaller form... somehow to upload to here...
thanks
viktor
i retouched a little this project... the letters were to close and i stretched a little them, also the wreath was not the best for 3d model...
i had to wrestling with adobe standards .... their ps file contain some visualbasic like settings, also on the first line in the file they have some settings,,,, this is the main reason some of these not available to import in aspire,,,
the solution try to rename simple way *.ps to *.eps... in most case it will help... the other settings are difficult so if you feel adventorous try it...
i made a complex 3d model of james plaque and i try to put in smaller form... somehow to upload to here...
thanks
viktor
- metalworkz
- Vectric Wizard
- Posts: 2463
- Joined: Mon Mar 31, 2008 3:26 am
- Model of CNC Machine: SX3 CNC, DIY 24x20 & 48x60 routers
- Location: Modesto, California 95358 USA
Re: MIA POW V3M file
Hello Viktor,
It looks great!
It looks great!
- BSImages
- Vectric Wizard
- Posts: 340
- Joined: Fri Jan 20, 2006 7:36 am
- Model of CNC Machine: Home designed and built.
- Location: Pine Grove, California
- Contact:
Re: MIA POW V3M file
GREAT JOB!
What were your settings?
What bit(s) did you use?
Thanks for posting,
Bill
What were your settings?
What bit(s) did you use?
Thanks for posting,
Bill
Re: MIA POW V3M file
hello bill
sorry i did not answer earlier...
1x12 maple, 1/16 ballendmill...
viktor
sorry i did not answer earlier...
1x12 maple, 1/16 ballendmill...
viktor
- RoutnAbout
- Vectric Wizard
- Posts: 2087
- Joined: Mon Sep 19, 2005 11:09 pm
- Model of CNC Machine: 24x18 Desktop
- Location: North Manchester, Indiana
Re: MIA POW V3M file
Here's my latest version. If all goes well, I plan to cut this with in a couple of days.
Thanks for providing this JamesB
Thanks for providing this JamesB
-
- Posts: 32
- Joined: Sat Mar 27, 2010 5:44 am
Re: MIA POW V3M file
Don,
That is awesome looking! Nice work. Look forward to seeing it done.
Dave
That is awesome looking! Nice work. Look forward to seeing it done.
Dave
-
- Posts: 40
- Joined: Thu Sep 17, 2009 11:47 pm
- Model of CNC Machine: CNC Shark Pro
- Location: GRAND RAPIDS, MI
- Contact:
Re: MIA POW V3M file
WOW Don. That is by all means the best I have ever seen. thank you for posting it.
-
- Vectric Craftsman
- Posts: 122
- Joined: Sat Jan 05, 2013 8:16 pm
- Model of CNC Machine: Homegrown
- Location: Central Minnesota
Re: MIA POW V3M file
I know this is an old topic but I used the file tonight for a cribbage board. Thank you to the original person that posted this.