Camp Welcome Sign

Tips, tricks and questions about the free Design and Make 3D Machinist from https://store.designandmake.com/ - Design & Make projects

Moderator: Todd Bailey

Post Reply
User avatar
Todd Bailey
Vectric Staff
Posts: 622
Joined: Mon Nov 24, 2014 8:40 pm
Model of CNC Machine: CraftCNC
Contact:

Camp Welcome Sign

Post by Todd Bailey »

This post is for all the Design and Make enthusiasts out there!

Just a quick post to keep you up to date on what is new over at www.DesignandMake.com.

=========================================

Introducing our latest Hack of the Week Model Project
Hack of the Week No.177
https://store.designandmake.com/shop/product/18322

Might be the right time to replace that tired old camp welcome sign! Don't forget this HOTW can be easily customized for all kinds of uses!

or

If the included Assembled Layout is not just quite right, you have all you need to make it your own. Recreate the bits you like using the single models included in the hack and then add in some of your own!

4 models, 1 assembled layout, 1 Project Sheet. All offered in .V3M format for VCarve Pro 8, VCarve Desktop or Aspire.

Remember, all the models in this pack can be cut as individual models or combined with other models in your library.

=========================================

Browse all of our Hack of the Week Model Projects... https://store.designandmake.com/search/ ... ype=search

Check out what other Design and Make users have been up to - http://designandmakeit.com/index.php/ca ... mer-focus/

Don't forget to follow us on:

FB - https://www.facebook.com/designandmakeit
Instagram - https://www.instagram.com/designandmakeit/
Twitter - https://twitter.com/DesignAndMakeIt
Attachments
Possible Customization of the Assemble Layout
Possible Customization of the Assemble Layout
The Included Assembled Layout - Easy to customize!
The Included Assembled Layout - Easy to customize!
All 4 Single Models included in this Hack of the Week Model Project
All 4 Single Models included in this Hack of the Week Model Project
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com

User avatar
mtylerfl
Vectric Archimage
Posts: 5865
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA

Re: Camp Welcome Sign

Post by mtylerfl »

That's a nice collection of models, Todd! I'm sure folks will enjoy those for use in a variety of projects!
Michael Tyler

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

Post Reply