How to make 3d relief.
Moderator: Todd Bailey
-
- Posts: 1
- Joined: Wed Dec 16, 2015 6:59 pm
- Model of CNC Machine: China cnc
- Location: Finland, Raasepori
- Contact:
How to make 3d relief.
Hi,i have vcarve pro and wanna make my own pic 3d board. Is there some proc. to use?
- Adrian
- Vectric Archimage
- Posts: 14660
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: How to make 3d relief.
From scratch or using one of the Design and Make models?
If it's from scratch then you can't really do that in VCarve (although it does depend to some extent exactly what it is that you want to do) as VCarve doesn't have the tools to create models. Only Aspire has that capability in the Vectric product range.
If it's an existing model that you want to machine then VCarve (v8 and on) can certainly do that and there is a whole range of tutorial videos available at http://support.vectric.com that will show you how.
If it's from scratch then you can't really do that in VCarve (although it does depend to some extent exactly what it is that you want to do) as VCarve doesn't have the tools to create models. Only Aspire has that capability in the Vectric product range.
If it's an existing model that you want to machine then VCarve (v8 and on) can certainly do that and there is a whole range of tutorial videos available at http://support.vectric.com that will show you how.
- highpockets
- Vectric Wizard
- Posts: 3667
- Joined: Tue Jan 06, 2015 4:04 pm
- Model of CNC Machine: PDJ Pilot Pro
Re: How to make 3d relief.
Can you post a picture of what you are trying to accomplish?
John
Maker of Chips
Maker of Chips