New to Design&Make? Here's a free project to get you going.
Moderator: Todd Bailey
- Todd Bailey
- Vectric Staff
- Posts: 622
- Joined: Mon Nov 24, 2014 8:40 pm
- Model of CNC Machine: CraftCNC
- Contact:
New to Design&Make? Here's a free project to get you going.
------------------------------------------------------------------------------------------------------------------------------------------
So you've never used one of our Design and Make CNC projects. Would it help if we had a step by step video to get
you started and a free project so you can follow along?
Interested? Well we just happen to have exactly that and a ton of inspiration!
All you need to do is head over to our Getting Started page and it's all there.
Link to the Getting Started Page - http://designandmake.com/getting-started-guide/
The Free Project -
If you are a VCarve Desktop, Pro 8 or Aspire user download the .V3M version.
The Video -
Once you have the project installed you can follow along with the Getting Started video and see just how easy it is. Link to video -
Some Inspiration -
Check out this finished project that uses the Assembled layout in the free Heart and Ribbon CNC project.
Thanks Don Harding for sending this in to us.
And after that -
Once you get started it's as easy as....
Pop's Tool Shop No.2 was used in the above example - http://designandmake.com/pops-tool-shop-no2
Check out what other Design and Make users have been up to:
http://designandmake.com/the-latest-from-our-customers
Don't forget to follow us on:
FB - https://www.facebook.com/designandmakeit
Twitter - https://twitter.com/DesignAndMakeIt
Be safe and let the chips fly!
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com
Todd Bailey | Design and Make
DesignAndMake.com