New to Design&Make? Here's a free project to get you going.

Tips, tricks and questions about the free Design and Make 3D Machinist from https://store.designandmake.com/ - Design & Make projects

Moderator: Todd Bailey

Post Reply
User avatar
Todd Bailey
Vectric Staff
Posts: 622
Joined: Mon Nov 24, 2014 8:40 pm
Model of CNC Machine: CraftCNC
Contact:

New to Design&Make? Here's a free project to get you going.

Post by Todd Bailey »

Image
------------------------------------------------------------------------------------------------------------------------------------------

So you've never used one of our Design and Make CNC projects. Would it help if we had a step by step video to get
you started and a free project so you can follow along?

Interested? Well we just happen to have exactly that and a ton of inspiration!
All you need to do is head over to our Getting Started page and it's all there.

Link to the Getting Started Page - http://designandmake.com/getting-started-guide/

The Free Project -

Image

If you are a VCarve Desktop, Pro 8 or Aspire user download the .V3M version.

The Video -

Once you have the project installed you can follow along with the Getting Started video and see just how easy it is.
Getting Started Guide - Video
Getting Started Guide - Video
Link to video -

Some Inspiration -

Check out this finished project that uses the Assembled layout in the free Heart and Ribbon CNC project.

Image

Thanks Don Harding for sending this in to us.

And after that -

Once you get started it's as easy as....

Image
Pop's Tool Shop No.2 was used in the above example - http://designandmake.com/pops-tool-shop-no2

Check out what other Design and Make users have been up to:
http://designandmake.com/the-latest-from-our-customers

Don't forget to follow us on:

FB - https://www.facebook.com/designandmakeit
Twitter - https://twitter.com/DesignAndMakeIt

Be safe and let the chips fly!
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com

Post Reply