Mount Rushmore

Tips, tricks and questions about the free Design and Make 3D Machinist from https://store.designandmake.com/ - Design & Make projects

Moderator: Todd Bailey

Post Reply
User avatar
JamesB
Vectric Alumni
Posts: 1257
Joined: Tue May 30, 2006 1:24 pm
Model of CNC Machine: Exel CNC SL60/90 Pro
Location: Warwickshire, UK

Mount Rushmore

Post by JamesB »

We typically don't post when we add a single new model to Vector Art 3D but we've added something that we've been asked for many times and has been a long time in production, so I thought I would make an exception and mention it here in case it is of interest. We've finally got round to adding a view of Mount Rushmore, you can see our version in the image below, it was created in Aspire but has been a work in progress for a while with a few of us contributing to it as different times to get in finished.

To give an idea of physical scale, at 12 inches wide the A version of this model will be almost 8 inches high and around 0.32 inches Z depth.

Hopefully it will be of interest to some people - you can purchase the model from here: https://www.vectorart3d.com/store/?Fuse ... l&ID=58451
James
Attachments
Rushmore_VA3D.jpg

MarkJohnston
Vectric Wizard
Posts: 823
Joined: Tue Jun 01, 2010 4:51 pm
Model of CNC Machine: CAMaster MC4848
Location: Prescott AZ

Re: Mount Rushmore

Post by MarkJohnston »

Wow James that is really nice!! Now I have to find a place to use that model.

Mark

Post Reply