Vectric Forum Post
This post is for all the Design and Make enthusiasts out there!
Just a quick post to keep you up to date on what is new over at www.DesignandMake.com
Introducing our latest project - Thanksgiving No.1
- http://designandmake.com/thanksgiving-no17 models
, 1 assembled layout
and 1 Project Sheet
. All offered in .V3M format for VCarve Pro 8, VCarve Desktop or Aspire.
All the models can be machined separately, combined to make a much more complicated part or hacked together with other project models or some from your own library.
=========================================A LITTLE SOMETHING EXTRA!
We took the time to create a short video
to help get you started with this project... https://youtu.be/pKv3NPDtu34
If you have a few minutes it is sure to be helpful!
Take a look at our weekly hacks... http://designandmake.com/hacks/
Check out what other #WeekendCNCWarriors have been up too - http://www.weekendcncwarrior.com
Don't forget to follow us on:FB
Be safe and let the chips fly!