New projects from Design and Make! Tiki Bar No.2 & No.3

Tips, tricks and questions about the free Design and Make 3D Machinist from https://store.designandmake.com/ - Design & Make projects

Moderator: Todd Bailey

Post Reply
User avatar
Todd Bailey
Vectric Staff
Posts: 622
Joined: Mon Nov 24, 2014 8:40 pm
Model of CNC Machine: CraftCNC
Contact:

New projects from Design and Make! Tiki Bar No.2 & No.3

Post by Todd Bailey »

Hey "Weekend CNC Warriors" out there.

Just a quick post to keep you up to date on what is new over at www.DesignandMake.com.

Introducing our latest projects - Tiki Bar No.1 and Tiki Bar No.2 - http://designandmake.com/tiki-bar-no2
http://designandmake.com/tiki-bar-no3

Tiki Bar No.2 was created so that you could layout your very own bamboo font. The bamboo pieces have been specially designed to fit together to make a great looking font! We have also included a "letter key" page to help you layout all 24 uppercase letters. Don't let your creativity stop at just letters and symbols because there is much, much more you can do with this project. We have included a new Tiki Mask and some great inspiration on the project sheet to get you going.
Tiki Bar No.2 - All Models
Tiki Bar No.2 - All Models
Tiki Bar No.2 - Possible letter layout
Tiki Bar No.2 - Possible letter layout
Tiki Bar No.2 - Included Assembly
Tiki Bar No.2 - Included Assembly
7 models, 1 assembled layout, 1 Letter Key layout page and 1 Project Sheet. All offered in .V3M format for VCarve Pro 8, VCarve Desktop or Aspire.



Tiki Bar No.3 project has been designed so that you can make bamboo picture frames of any size, bamboo headboards or large bamboo textures for signs. The kind of stuff you can use around the grass hut to jazz things up a bit! We have also included a grass hut model to help you expand this projects uses.
Tiki Bar No.3 - All Models
Tiki Bar No.3 - All Models
Tiki Bar No.3 - Possible Layout
Tiki Bar No.3 - Possible Layout
Tiki Bar No.3 - Included Assembly - 4x6 frame
Tiki Bar No.3 - Included Assembly - 4x6 frame
5 models, 1 assembled layout and 1 Project Sheet. All offered in .V3M format for VCarve Pro 8, VCarve Desktop or Aspire.

Of course all of the models can be machined separately, combined to make a much more complicated part or hacked together with other project models or some from your own library.

Take a look at our weekly hacks... http://designandmake.com/hacks/

Check out what other #WeekendCNCWarriors have been up too - http://www.weekendcncwarrior.com

Don't forget to follow us on:

FB - https://www.facebook.com/designandmakeit
Twitter - https://twitter.com/DesignAndMakeIt

Be safe and let the chips fly!
------------------------------------
Todd Bailey | Design and Make
DesignAndMake.com

Post Reply