Question about editing Post Processors in 3d Machinist.
Moderator: Todd Bailey
Question about editing Post Processors in 3d Machinist.
Is it possible to edit the post processor in 3d machinist? I had the trial version of v carve pro and know that the post processors can be edited in that program. But I cannot see anything in 3d machinist on how to do this.
- Adrian
- Vectric Archimage
- Posts: 14546
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Question about editing Post Processors in 3d Machinist.
The PP's for machinist are in the Program Files/Vector Art 3D Machinist/PostP folder
They look to be standard but older format PP files (like Cut3D) so a lot of the information in the VCarve PP help file wouldn't apply.
They look to be standard but older format PP files (like Cut3D) so a lot of the information in the VCarve PP help file wouldn't apply.
Re: Question about editing Post Processors in 3d Machinist.
Thanks Adrian for the reply I will check this out. I have a PP that a friend gave ne that he uses on his Thermwood machine that is the same as ours. My son harvested a nice buck this weekend and I would like to try to carve the shoulder mount for him. That is when he gets it back in a few months. But in the mean time I would like to make sure that this 3d machinist program will work on our machine.