Can you make the Wolf2 http://www.vectorart3d.com/store/index. ... l&ID=57630 avaliable for the carvewright machine?
David
Question for James
Moderator: Todd Bailey
- JamesB
- Vectric Alumni
- Posts: 1257
- Joined: Tue May 30, 2006 1:24 pm
- Model of CNC Machine: Exel CNC SL60/90 Pro
- Location: Warwickshire, UK
Re: Question for James
Hello David,
Model is on the Pattern Depot on the CW site already - https://store.carvewright.com/product.p ... t=0&page=2
If you want the PTN. If you have the STL importer for the CW though you can buy the STL direct from the VA3D site and keep the flexibility of other software in the future.
Cheers,
James
Model is on the Pattern Depot on the CW site already - https://store.carvewright.com/product.p ... t=0&page=2
If you want the PTN. If you have the STL importer for the CW though you can buy the STL direct from the VA3D site and keep the flexibility of other software in the future.
Cheers,
James
Re: Question for James
Thanks James!