PhotoVcarve vs Aspire

This forum is for general discussion about PhotoVCarve.
Post Reply
Allen
Posts: 26
Joined: Sat Oct 24, 2015 4:00 am
Model of CNC Machine: Built it myself/ Linuxcnc control

PhotoVcarve vs Aspire

Post by Allen »

Hi folks,

Is PhotoVcave something to consider in addition to Aspire, or is it redundant?

Thanks in advance

User avatar
SteveNelson46
Vectric Wizard
Posts: 2282
Joined: Wed Jan 04, 2012 2:43 pm
Model of CNC Machine: Camaster Stinger 1
Location: Tucson, Az.

Re: PhotoVcarve vs Aspire

Post by SteveNelson46 »

Aspire will do everything that PhotoVcarve can do. It may require a little more setup though. Search this forum for lots of discussion.
Steve

User avatar
Adrian
Vectric Archimage
Posts: 14544
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: PhotoVcarve vs Aspire

Post by Adrian »

Aspire can do photovcarving but it's a very different process. This thread covers the main two ways of doing it - viewtopic.php?p=61687#p61687

Allen
Posts: 26
Joined: Sat Oct 24, 2015 4:00 am
Model of CNC Machine: Built it myself/ Linuxcnc control

Re: PhotoVcarve vs Aspire

Post by Allen »

Thanks very much for your help.

Post Reply